Hrm. joeschmo started his account 10/30. Yak was banned by Army 10/23. Again today. Here's some typical postings:
Yup. No way thats the same guy. None at all.
/ping!
Today, 07:27 AM
that doesnt mean that bk and hybrid are working together. Dye stickys look like a lot of other grips too, but they arent made by the same company.
Calling someone a exhibit in a retard show IS flaming btw mark. I dont know what kind of rules you go by on AO, but its flaming. It doesnt have to be repetative to be flaming. Yak had the right to respond how he did.
You also insisted that the picture was not taken by him in your second post. I mean...cmon? are you serious are was that just sarcasm? In his first post, yak says.... pics that I took. Why would you say something like that. Do you not believe the guy?
And IMO the picture is not badly taken. There are so many pics from so many different angles and you guys are persistently provoking yak in A LOT of threads. Just about every one he posts in. Funny how ppl dont get banned for doing that to yak, but yak gets banned for being defensive to ppls personal attacks. just an observation. AO moderations needs to step up and take control of it in ALL threads IMO. Its turning into a flame fest in every thread. And yak has participated in some, and some he hasnt. You guys are harrasing him and its obvious reading through all the posts.
AND FINALLY ON TOPIC. I can tell the difference in size is definitely noticable. Its also enough to make the newer proto a lot lighter than the older models of matrixes.
Nice guns, I like them both. Now all ya need is an emag in there. .
that doesnt mean that bk and hybrid are working together. Dye stickys look like a lot of other grips too, but they arent made by the same company.
Calling someone a exhibit in a retard show IS flaming btw mark. I dont know what kind of rules you go by on AO, but its flaming. It doesnt have to be repetative to be flaming. Yak had the right to respond how he did.
You also insisted that the picture was not taken by him in your second post. I mean...cmon? are you serious are was that just sarcasm? In his first post, yak says.... pics that I took. Why would you say something like that. Do you not believe the guy?
And IMO the picture is not badly taken. There are so many pics from so many different angles and you guys are persistently provoking yak in A LOT of threads. Just about every one he posts in. Funny how ppl dont get banned for doing that to yak, but yak gets banned for being defensive to ppls personal attacks. just an observation. AO moderations needs to step up and take control of it in ALL threads IMO. Its turning into a flame fest in every thread. And yak has participated in some, and some he hasnt. You guys are harrasing him and its obvious reading through all the posts.
AND FINALLY ON TOPIC. I can tell the difference in size is definitely noticable. Its also enough to make the newer proto a lot lighter than the older models of matrixes.
Nice guns, I like them both. Now all ya need is an emag in there. .
Today, 07:31 AM
to me that is flaming too. Why do you have to stir the pot? You are doing that to provoke a response.
to me that is flaming too. Why do you have to stir the pot? You are doing that to provoke a response.
10-31-2005, 08:59 AM
I havent noticed much a balance difference between the two markers in question here.
For what you do to one marker, you must do to the other if you are comparing kick between them. So if you compare a viking w/ a bull barrel on it, then the bull barrel must be put on the DM to check it. Dont slap a bull barrel on a viking and then an ultralite on the DM. I still dont think that would matter though.
on another note not mentioned earlier. What mods can you do to a viking to lower kick? None, other than cut the bolt back off. Cant even do that on the 04. What can you do to lower kick on the DM4? Orange bolt, evolve bolt, and any other bolt mods that dont really effect kick like the 530 mod, which is easy and free, and the tape, or tophat mod, that takes all of 10 seconds to do. Those mods arent extensive at all. The 530 just cuts off the two bars on the bolt guy allowing for better flow through the bolt and the tophat mod just decreases the volume of the dump chamber and is supposed to give better efficiency.
Thing is that these mods work against each other kinda. one decreases the volume of the dump chamber, and the other increases it. The mods are very simple and free to do. The orange bolt however is not free, but very simple to replace.
I havent noticed much a balance difference between the two markers in question here.
For what you do to one marker, you must do to the other if you are comparing kick between them. So if you compare a viking w/ a bull barrel on it, then the bull barrel must be put on the DM to check it. Dont slap a bull barrel on a viking and then an ultralite on the DM. I still dont think that would matter though.
on another note not mentioned earlier. What mods can you do to a viking to lower kick? None, other than cut the bolt back off. Cant even do that on the 04. What can you do to lower kick on the DM4? Orange bolt, evolve bolt, and any other bolt mods that dont really effect kick like the 530 mod, which is easy and free, and the tape, or tophat mod, that takes all of 10 seconds to do. Those mods arent extensive at all. The 530 just cuts off the two bars on the bolt guy allowing for better flow through the bolt and the tophat mod just decreases the volume of the dump chamber and is supposed to give better efficiency.
Thing is that these mods work against each other kinda. one decreases the volume of the dump chamber, and the other increases it. The mods are very simple and free to do. The orange bolt however is not free, but very simple to replace.
10-30-2005, 07:03 PM
eh ehm.....mags. looks are preference. Its just a bad job. Look at the pic w/ the eye covers the bottom of them are blah and screwed up and exposed. the intenal eye hole is exposed which prolly means cleaning if you get shot on the side of the gun there.
the slit in the back between the tubes is
so, correction, youll take ugly poorly designed cnc tubes over a sexy 3d body anyday.
also, it looks too much like a old school trix. Why not juts mill it like the old ones?
eh ehm.....mags. looks are preference. Its just a bad job. Look at the pic w/ the eye covers the bottom of them are blah and screwed up and exposed. the intenal eye hole is exposed which prolly means cleaning if you get shot on the side of the gun there.
the slit in the back between the tubes is
so, correction, youll take ugly poorly designed cnc tubes over a sexy 3d body anyday.
also, it looks too much like a old school trix. Why not juts mill it like the old ones?
Yup. No way thats the same guy. None at all.
/ping!
.
Comment