Classic Valve question

[FlawleZ]

Here ya go:

http://home.comcast.net/~beemerone/HitechHyper1.avi

http://home.comcast.net/~beemerone/HitechHyper2.avi

What reg and how much input pressure were you running? That's uber fast for a Classic Valve. I knew they were underrated, but not that much. The .720 RT on/off is just a drop in? No other modifications?

[Beemer]

Wow. And those are just RT on/offs with .720 pins on that Emag?

Ummm NO. Those are classis Mags, Hyper Frame. CF on offs.

It wasnt caused by the on/off, but by the pressure in the valve.

I dont get it. Those are classic valves 800psi in, 20BPS. Looks like it recharges fast enough to me.

What reg and how much input pressure were you running? That's uber fast for a Classic Valve. I knew they were underrated, but not that much. The .720 RT on/off is just a drop in? No other modifications

That is a stock minimag. The tank is a preset PMI 68/3K. It has a level 10 bolt with the short spring (the middle & long spring will not work). The on/off is the centerflag on/off with their "long" pin.

Wheres that slacker Hitech. He was going to measure the pin length.

I'll try to dig up a mic and measure it.

Here ya go:

Link to the Thread also helps.

Here. http://www.automags.org/forums/showthread.php?t=196472


Peace Out

____________

[hitech]

Wow. And those are just RT on/offs with .720 pins on that Emag?

Nope, that's a hyperframed classic (mini-mag to be exact). It is using the center flag on/off with the "standard" length on/off pin.

[Beemer]

Hey how long is the standard? Stop slacking and find a mic.

[hitech]

Hey how long is the standard? Stop slacking and find a mic.

I need to dig up a mic. Or, you could call centerflag and ask them. I don't know if anyone else knows, but Dennis knows that stuff off the top of his head...



P.S. In the other thread i said it was the long pin. Sorry, that was wrong. I used the long pin in my classic valved automag. The mini-mag used the normal length pin. Memory is the second thing to go...