Mini-Morlocks back?
Collapse
X
-
Originally posted by behemothSo when they say Martch 7th, 2007, they really mean March 7th, 2009 right?
LOL. Good question. Let's see.
Edit**
Oh yeah, people can probably thank Rudz for this. His rampage brought the Dmag mess to TAG's attention and I would guess that re-releasing these is a direct result.
Comment
-
OMG ... i can see my next project ... sleeper of a BLM spyder ...I need measurements
Even still it'd be nice to have around ... i want to build an electro after the pump mag is done.
Comment
-
-
colin from deadlywind did this already - they're mechanically capped at 9bps.Originally posted by LennyDual solenoid control? Does that mean it'll work with shoeboxes? Giddy!

PBN Feedback AO Feedback eBay Feedback
DIRTY ROTTEN SCOUNDRELS (Rob Kenny and Matt Bradley) LIVE @ www.djinnuendo.com TUES 2/8 - 8 to 10PM
Comment
-
why bother at that point. for the cost of the new noids, modification work to fit them, and the mini-morlock you can most likely find a 04 shocker lolOriginally posted by BigEvilI admittedly know nothing about the shoeboxes but there has to be a way to overcome that. New noids? I dunno?
PBN Feedback AO Feedback eBay Feedback
DIRTY ROTTEN SCOUNDRELS (Rob Kenny and Matt Bradley) LIVE @ www.djinnuendo.com TUES 2/8 - 8 to 10PM
Comment
-
but then you don't get the joy of bunkering a kid with a 20lb 4,000 BPS brickOriginally posted by rkjunior303why bother at that point. for the cost of the new noids, modification work to fit them, and the mini-morlock you can most likely find a 04 shocker lol
Comment
-
Originally posted by rkjunior303why bother at that point. for the cost of the new noids, modification work to fit them, and the mini-morlock you can most likely find a 04 shocker lol
Tinkering doesn't need a point, that's why it's tinkering. As for why bother, the typical answer is because you can.
Comment
-
That must have been a direct result of the board (which I don't see how it could be).Originally posted by rkjunior303colin from deadlywind did this already - they're mechanically capped at 9bps.
From Ydna's site (www.zdspb.com)
"Q: What is the Shocker Sport's maximum rate of fire?
A: This is different between DS and LS boards. With DS boards, you can adjust the Shocker to fire 11.25-bps using the fastest settings, whereas the LS board can be adjusted to 13-bps using its maximums. The rate of fire will decrease, however, if your bolt speed is not set to its fastest settings (which it usually is not). "
Comment





Comment