Predator II Board - Authorized Install Center

[Sk8ermog]

If you don't mind Richter I would like to hear CoolHand's answer to the hyperframe install. It's said to run on a 9volt battery so I can only assume it would work on a hyperframe, right? I have a few hyperframed mags that could be a little faster So will it work in a hyperframe?

[CoolHand]

so what your saying is even though i have a gun all ready to just drop the board in (a $150 board). iam going to have to pay you or some other dealer $350 just to drop the board in? (iam not angry with you in anyway just to let you know, so please dont take this personaly. just at the stupid people that made this happen.)
thanks,
chris
- oh, and is there any way to buy the board from the company? i mean that, that way they know what iam doing. so that if there was a problem that they know to point the finger at me and say that it was my fault?

No, that's not exactly right. If your marker is all ready, and all I have to do is solder it together and mount the board, I can do that for $200.

KM2 will not sell to the public directly. TAG is basically their only distributor.

As for the HyperFrame, I've never put a Pred in a HyperFrame before, but I don't see why it wouldn't work. If it can throw an EMag 'noid, the tiny pancake in the HF should be no problem. The price is the same though, $350 for the break beam eyes, or $250 with no eyes at all.

I'll have to talk with TAG about the trigger mod, but I don't see the machine work being too much for me to pull off. Its not gonna be free though. Shouldn't be too high though either.

Let me talk with Bob and see what's what.

Thank you for your interest.

[Chris Nearchos]

thank you

thank you very much for your time and help coolhand. i guess you`ll be seeing my marker come in for the pread board soon. just need to finish some odds and end on it.
thanks again,
chris

[meshaq]

it says it can run off a 9 volt, so if i had one in my emag, id be able to run it off a 9v effectivly?

[trains are bad]

no.

[CoolHand]

it says it can run off a 9 volt, so if i had one in my emag, id be able to run it off a 9v effectivly?

Nope, that big ol' 'noid would suck that little battery dry in just a few shots, if it cycled at all.

E/XMags gotta use their stock 18v honkin' battery.

Thank you for your interest.

[oledude]

Ryan,

What's involved with a Viking install? And how hard is tournement lock to semi to do?
Thanks, Eric

[CoolHand]

Ryan,

What's involved with a Viking install? And how hard is tournement lock to semi to do?
Thanks, Eric

If its got eyes now, then its just a matter of cutting up the harness and soldering the new parts in place. If it doesn't have eyes now, then I'll have to get some covers, and cut the holes through the breech.

That's about it. No different than any other marker really.

The tourney lock is simple to activate, you just flip these two little DIPP switches on the board to the "ON" position. Then you can't change the settings. To get back to the settings, you just flip them back to the "OFF" position. Easy Peasy.

Thank you for your interest.

[oledude]

Ryan,

Sent you an email. Would like one for 04 Viking w/ WAS eyes.

Eric

[CoolHand]

Ryan,

Sent you an email. Would like one for 04 Viking w/ WAS eyes.

Eric

Got it, and replied.

Thank you for your interest.

[CoolHand]

Bump

[Gambit1106]

Ryan,

What covers are you using for the eyes? I have an IT body, and just want to picture what the covers will look like on it? Thanks

Edit: Also would the eye wires be ran in the rail of an e-mag or external?

Darren

[Flow_Tech]

can you do Matrixs?

[CoolHand]

Ryan,

What covers are you using for the eyes? I have an IT body, and just want to picture what the covers will look like on it? Thanks

Edit: Also would the eye wires be ran in the rail of an e-mag or external?

Darren

They are just little oval shaped pieces of alum. All that will show is a piece of alum .26" wide by .56" long with rounded ends (like a race track is shaped) on both sides. All the wires are ran inside the rail (which means you get some machine work there too).

They are not done yet, but I will post some pics when I get them.

Couponqueen - I can do a Matrix, but I will most likely end up using the EBlade covers for them. Its a pretty long trip from the breech to the frame on them.

Thank you for your interest.

[Flow_Tech]

Alright,any idea on a price for a pre-ACEd trix?