Logic Ripper EM - The Electro Solution - PreOrder

[jade_monkey07]

im sure its been said but whats going on with the extras?

[CoolHand]

im sure its been said but whats going on with the extras?

Well, the laser engraver has long since gone out of business, and even if he hadn't, I'm so damned broke, I couldn't pay him to do the work anyway.

The eye covers are included, but they're raw. The eye components are included for bolt-ons, but they're your responsibility to put together and install in the gun.

These eye covers will only work with ULE bodies, so the Karta/Dallara guys are going to have to live with the LVL X bolts like the E/XMag guys do.

I'm sorry, but I cannot afford to replace a Karta if things go poorly. It's just not worth the risk to the body IMO, and the eye covers won't work with them anyway.

Since the SULE rails weren't included with the full markers like I'd planned, they are not really in any shape to do an eye install on (a lot of machine work to the rail would be required), so they will go out with the eye parts included, but not installed.

If/When I do some SULE rails to sell, I will attempt to cut enough extra to give one to every guy who ordered a full marker. Assuming I have the funds to spend on material and the time to do it. I cannot promise these rails will be delivered in a timely (HA!) fashion, so I am loath to mention them at all, but they were promised to the full marker guys, and I had to go with stock rails instead, so they are owed them if at all possible.

If/When I get the SULE rails done for the full marker guys, I will gladly install the new rail and the eyes on their marker for them.

I figured it better to deliver a 95% product in a few weeks than to extend the wait indefinitely again. At least you can be using your marker while you wait on the rails and eyes.

That's what I've got.

It's not exactly what I promised, but it's the best I can do in my current situation.

[p8ntbal4me]

UPDATE:

I worked on the Ripper Project some more today

On the left you can see the remaining wire harnesses that are "extra" beyond the pre-order gun orders. The only things missing from these harnesses on the left are LEDs and Solenoids.

The ones on the right are the completed ones for the pre-order guns.

There are (5) "extra" upper boards (one is not in the picture) that I soldered power switches to for parts.



Hoping to finish up this project soon!

List of things that have been done:

Pre-Order electronics are good to go

I completed 15 harnesses with LEDs
I completed 15 harnesses with solenoids
All harnesses have power switches
All harnesses have daughter boards
All harnesses have battery snaps
All harnesses have capacitors
All harnesses have trigger switches

~ P8nt

[afortuna]

Dude, is your stomach feeling a little "Sensitive" after having worked on this project? Well, relax. Everyone thinks you are doing a great job. Yes, some are salivating more than others, but that is because we never got in on the preorder. Keep plugging away. Your work looks top notch.

[CoolHand]

Out-freakin-standing.

You fished my *** out of the frozen river on this one man, and I appreciate it greatly.

[p8ntbal4me]

Dude, is your stomach feeling a little "Sensitive" after having worked on this project? Well, relax. Everyone thinks you are doing a great job. Yes, some are salivating more than others, but that is because we never got in on the preorder. Keep plugging away. Your work looks top notch.

My daughters formula,....

I might as well be drinking it too!

Nah,.. the Ripper project has had its fair share of delays on my end. Mostly due to my winter schedule with my 6 month old here,.. she changes everything,.. but for the better!

Were sooooooooo close,..... I figure the LEDs will be it. The solenoids take no time to do,. and I already stripped the wires for them.

Moving Forward!

~ P8nt

[going_home]

My daughters formula,....

I might as well be drinking it too!

Nah,.. the Ripper project has had its fair share of delays on my end. Mostly due to my winter schedule with my 6 month old here,.. she changes everything,.. but for the better!

Were sooooooooo close,..... I figure the LEDs will be it. The solenoids take no time to do,. and I already stripped the wires for them.

Moving Forward!

~ P8nt

I'm mag-less for the first time in probably 8 years.
An A-5 and an SP-1 is it now.
If I get my 2009 PTP MicroMag body and my Logic EM Ripper in the same year
I will be a very very happy fat guy

[p8ntbal4me]

UPDATE

Well,... we are at the end.... finally!

I had some time yesterday to sit down and bang out all the LEDs needed.




Only thing I have to do is program the boards to the correct settings.

~ P8nt



List of things that have been done:

Pre-Order electronics are good to go

I completed 15 harnesses with solenoids
All harnesses have LEDs
All harnesses have power switches
All harnesses have daughter boards
All harnesses have battery snaps
All harnesses have capacitors
All harnesses have trigger switches

[manwe33]

such great news

[WenULiVeUdiE]

I've been following this since the beginning and it's awesome to hear that it is finally finished. Good job to everyone involved!

[p8ntbal4me]

UPDATE

Tomorrow is the day guys.

I have boxed up all the electronics and have the entire assembly from my end ready to ship back to Ryan.

We are still moving forward,... this should be the last hurdle!

~ P8nt

[KC]

UPDATE

Tomorrow is the day guys.

I have boxed up all the electronics and have the entire assembly from my end ready to ship back to Ryan.

We are still moving forward,... this should be the last hurdle!

~ P8nt

That package is going to be tracked/insured right? (terrible feeling in the pit of my stomach.)

Cant wait to see Papa Smurfs when they are complete.

[CoolHand]

UPDATE

Tomorrow is the day guys.

I have boxed up all the electronics and have the entire assembly from my end ready to ship back to Ryan.

We are still moving forward,... this should be the last hurdle!

~ P8nt

Huzzah!!!!

[going_home]

I dont think I have to tell you that this makes me very happy.

[Papa_Smurf]

So now all that's left is assembly and shipment?