Logic Ripper EM - The Electro Solution - PreOrder

[SpecialBlend2786]

Keep it in your pants Gunga Din.

I just got a call from a buddy, and I gotta go back to the shop to work on his truck.

Pics will be delayed a bit, but I will get them taken and posted when I get back.

Hang in there.

oh em ge!

[MadPSIence]

*****in suspense*****

btw ryan how's the template for the laser engraving coming along?

[CoolHand]

OK, my bud is taking forever to get here, so I took some pics of the outsides.

Enjoy!

Driver's Side:


Trigger Guard/Eye Cover/LP Hose Detail:


Back of rail showing off the massive amount of material removed from all over (more pics when I get back of the rail and covers apart):


That is all for now. More when I get back.

[SpecialBlend2786]

HOLY ****

<3 those eye covers ryan.

friggin awesome. I cant wait till the boards come in!!!



EDIT: will hold off on badgering questions untill later

[Apple_Pie]

Lets drink to the awsome mag!

[MadPSIence]

All I can say is WOW.. BUT.. wow on the front end / lpr - is there any way to clean it up a bit? Even the NME is cleaner in terms of the lpr / hosing. That looks seriously ghetto rigged.. maybe it's just the ANS.

What type of AKA or STD LPR could I replace it with and what PSI would you set it to?

[SpecialBlend2786]

All I can say is WOW.. BUT.. wow on the front end / lpr - is there any way to clean it up a bit? Even the NME is cleaner in terms of the lpr / hosing. That looks seriously ghetto rigged.. maybe it's just the ANS.

What type of AKA or STD LPR could I replace it with and what PSI would you set it to?

nah, i think its just cause the jackhammer is red and everything else is raw, thats why it looks ghetto rigged.

I actually like the look of it.

Ryan, is it possible to get the mag all gloss black with gold eye covers, trigger, and jackhammer?

pweeze?

[master_alexander]

i was thinking about moving the lpr so that it is the foregrip, use one of thoes bottomline things (i have no clue of the name) and just put a slide over it.

would that work?

i think it would be a really cool idea...

[MadPSIence]

i was thinking about moving the lpr so that it is the foregrip, use one of thoes bottomline things (i have no clue of the name) and just put a slide over it.

would that work?

i think it would be a really cool idea...

if you can get air to both the LPR and the Valve then yes.. otherwise no.

[CoolHand]

Man, MadPSIence you sure know how to kick a man when he's feeling good.

How, exactly, would you make that connection look any cleaner? Its an 1/8 NPT pipe nipple, end of story. ANY LPR for a cocker is going to look exactly the same way.

By using a short 90 degree hose barb there instead of that huge push to connect, you can make the hosing run straighter (which is what I will do for the production stuff), but that fitting was already on that LPR, and its all I had setting here.

I could have done many things to make that look cleaner, down to making a whole front block assembly like an Intimidator has.

"But why didn't you then?!"

Because, this thing already costs $450. If I had gotten much more engineery with the parts (read that as - made them work more smoothly, but become more complex as a side effect), it would have turned into $500 or $550 really quickly.

I mean, you can do anything you like up there. Buy any LP output inline reg and use a "T" fitting down on the bottom line, then just run a hose nipple out of one of the ports for the frame. That is all up to you (this is why I left the option to buy it without an LPR at all).

This is going to have to be a thinking man's mod, in that you may have to put just a fuzz of thought (GASP! ) into your setup to get exactly what you want out of it. That, or pay me to do it for you. One of the two I guess. You'll either have to be smart and thrifty, or stupid and loaded. Sorry to all you stupid poor people out there, you're SOL. :rofl:

[warbeak2099]

That looks ridiculously awesome. Holy crap wow.

As for the eblade covers, I like how they look and I like my Alpha rail. So if I sent you some eblade covers, bb eyes, and my mag along with some MONEY, would you still be adverse to doing the install with the rubber covers? I think it's the best looking way to do it for people with AM/MM rails. However, those covers you have for the RT rails look hawter than hawt. The whole thing is beautiful.

[MadPSIence]

How am I kicking you? I'm putting FAITH into you, which about 3 people here have so far as the numbers show. I've paid 450 bucks for something that hasn't been built yet and supported it the whole way.

I think I should be allowed to give my opinion of things as it progresses. It's not like I'm backing out or saying the product sucks. You know very well I've been all about this frame since you first mentioned it.

[Lenny]

Hey, CoolHand, will you take installment plans on this? Being 17 and working part time, and having a girlfriend (freakin' expensive!) It'll take me a while to gather all the funds at once. But if I could pay monthly, I could probably do $70ish a month. I mean, they are going to take a few months anyway, right?

[CoolHand]

How am I kicking you? I'm putting FAITH into you, which about 3 people here have so far as the numbers show. I've paid 450 bucks for something that hasn't been built yet and supported it the whole way.

I think I should be allowed to give my opinion of things as it progresses. It's not like I'm backing out or saying the product sucks. You know very well I've been all about this frame since you first mentioned it.

It was a euphemism. Meaning that you know how to rain on my parade with criticism. Chill out. Also, for the record, they are built, they just aren't assembled.

I have enough parts here to build 25 of these bad boys right now, with 25 more being only about two weeks off (all I'm short on them is the frame itself).

You are more than welcome to your opinion, but you have to realize that comparing this product to even the NME is no where near a fair shake. I have 25 of these. They are making NME's by the thousands, in China, and they still sell for near a grand.

I can't even come close to touching their production prices (IE mine are likely at least 10 times higher), much less the complexity of their engineering. I can conceive of anything, design it, and bring it to fruition, sure. But I can't do for even close to what those guys can. It just costs a lot more to do things in the tiny batches I am forced into. Even at this batch size, I've got about $7500 tied up in this project, just in parts.

Don't take things so seriously, you'll be a lot happier.

[CoolHand]

Hey, CoolHand, will you take installment plans on this? Being 17 and working part time, and having a girlfriend (freakin' expensive!) It'll take me a while to gather all the funds at once. But if I could pay monthly, I could probably do $70ish a month. I mean, they are going to take a few months anyway, right?

I'm sure we can work something out. I've done layaway for other people before, just don't mail in cash every week like that guy did. :rofl:

Hit me with an email ( [email protected]) and we can discuss it.