Logic Ripper EM - The Electro Solution - PreOrder

[txaggie08]

Coolhand this is probably a dumb question, but would you be interested in doing a run of just the bare frames if you get these finished up? No electronics, no promise of support/electronics, just the raw machined aluminum and let everyone deal with there own electronics and assembly issues?


I know asking if you would ever sell more complete frames would probably get me not only told now, but to go "do something unspeakable" to myself, I just didn't know how you would feel about the basic metal.....

[CoolHand]

Coolhand this is probably a dumb question, but would you be interested in doing a run of just the bare frames if you get these finished up? No electronics, no promise of support/electronics, just the raw machined aluminum and let everyone deal with there own electronics and assembly issues?


I know asking if you would ever sell more complete frames would probably get me not only told now, but to go "do something unspeakable" to myself, I just didn't know how you would feel about the basic metal.....

I have ~8 of them left here now, unsold and bare.

When I get these preorders out, I will be offering those in kit form, just as you say: DIY/On Your Own

I could be persuaded to do a run of frames for someone to sell, but I cannot afford to front the money to stock them, so it would have to be a, "Distributor puts down a deposit and I make the frames which he then later sells at a profit" kind of deals.

I do the manufacturing, someone else does the customer service thing and bears the risk of stocking expensive components.

If someone wants to do that, I'm down.

Otherwise, I'm too broke and grumpy at the moment to pull it off.

[txaggie08]

K, simply curiosity.


**edit**

what would the kits run out of curiosity?

[p8ntbal4me]

Ryan;

I sent you another PM,.... should have all the answers you are looking for.

~ P8nt

[CoolHand]

K, simply curiosity.


**edit**

what would the kits run out of curiosity?

$450 raw, and shipped to your door (in the continental US).

[Arstron]

Wow coolhand, I am sorry you are still having so many problems with this project. I now am sorry for talking so good about the chaos boards back in 2006, but I ran into the same problems as you, I couldn't get it to power any solenoid. I was even trying it with a small 5 or 6 volt solenoid and it didn't work. I still have the board, I might pull it out and try to play around with it again one of these days.

Best of luck with the rest of the project coolhand, I hope your luck turns around. If you was a little further south I could help you out in the job department, as we have had a few businesses open/opening around here as of late.

[txaggie08]

The noids manifold mounter in these right? Is it possible to still get the noid you meant to use? Curious, really considering grabbing one of the blank kits and building a mag before I jump on the evil-m project...


Also, that raw kits comes with a ASA or no?

[CoolHand]

The noids manifold mounter in these right? Is it possible to still get the noid you meant to use? Curious, really considering grabbing one of the blank kits and building a mag before I jump on the evil-m project...


Also, that raw kits comes with a ASA or no?

Yes, the solenoids are manifold mount. I have enough solenoids to supply one with every kit I machined parts for, so if you buy a DIY kit, you get a solenoid with it.

All the kits come with an ASA as well.

[txaggie08]

awsome. If I can get back and get working in the next few eeks I'll be grabbing one.

[RFLMN1]

Any updates on these?

Jason

[CoolHand]

Any updates on these?

Jason

Not really.

I had been waiting for YDNA to send back the rest of my wiring harness parts, but it looks like he's forgotten or lost them or something, so I'm done waiting.

Over the weekend I'm gonna pack up the stuff to go to Paintball4Me, and hopefully he will be able to get the boards and harnesses squared away.

That's all I've got.

Have a good weekend all.

[Carnage reigns]

If I wanted you to complete a whole marker for me (Drilling and placing eyes, dual detenting my ULE, ripper frame, etc) how much would it cost?

[CoolHand]

If I wanted you to complete a whole marker for me (Drilling and placing eyes, dual detenting my ULE, ripper frame, etc) how much would it cost?

~$975

However, I'm not going to take any more of these on until the first bunch are out in their owner's hands.

I'm not making this project more complex just as it appears to be winding down.

When I get everyone else's stuff delivered, then and only then, will I sell the rest of the kits.

Sorry man, but the existing customers gotta come first.

[Carnage reigns]

Understandable

[going_home]

~$975

However, I'm not going to take any more of these on until the first bunch are out in their owner's hands.

I'm not making this project more complex just as it appears to be winding down.

When I get everyone else's stuff delivered, then and only then, will I sell the rest of the kits.

Sorry man, but the existing customers gotta come first.

Does this mean p8ntbal4me is making some progress ?

(and 975.00 is a great deal Carnage)