Logic Ripper EM - The Electro Solution - PreOrder

[CoolHand]

Still gotta do all the other ones!

~ P8nt

Yeah, I know, but even at that, it's still at least two orders of magnitude more progress than I've been able to produce in more than a year.

Just as an aside, I cannot believe how tiny those little boards are.

When I first saw that pic I was like. "Wow, that's great, three wires and a capacitor. Whoopty Doo."

Then I realized that the black lump I thought was a ball of tape, was actually the board and all the connectors.

Wowzers that thing is tiny.

I wish these would have been around when I did the design work, I might have gotten away with a slightly less bulky shape on the frame.

Keep it up man, you may yet salvage 2009 as a decent year, at least for the guys involved in this deal.

[p8ntbal4me]

Update:

My daughter is sick,.. so my weekend is looking to be shot for working on this

Sorry guys,....

I will try to sneek in some more hours in the middle of the week like last week.

Keep watching the thread!

~ P8nt

[CoolHand]

Update:

My daughter is sick,.. so my weekend is looking to be shot for working on this

Sorry guys,....

I will try to sneek in some more hours in the middle of the week like last week.

Keep watching the thread!

~ P8nt

Don't sweat it.

Curtain Climbers and Tricycle Motors come first.

[going_home]

Still all in all, exciting stuff.
Hasnt been this much excitement in this thread since post # 1309 !

[p8ntbal4me]

Update:

I dragged my 2 scuba tanks from my parents basement to my apartment tonight.

I found my old AKA reg and a KAPP reg as well. I will be using these in my testing.

Not much of a dent in the work,.. but some progress.

~ P8nt

[p8ntbal4me]

Update:

My sickness has left me with zero energy.

What I did today was applied the settings that Ryan was running on the Morlock board in his video and saved them in the UTB so its ready 100% for air.

I also filled my tanks up from the scubas so those are ready as well.

I need to get up into my storage area this weekend and get a drop and valve out,.... then I have to assemble the gun.

I will be testing the frame with and without eyes

Trying to get there guys,.... hold on!

~ P8nt

[CoolHand]

Excellent.

[p8ntbal4me]

Update;

Here is where Im at guys

All assembled except for valve and ASA


Close up of the eye covers


Frame powered on


Here is a shot of the breech with eyes working


Next update wont be for 2 weeks. Hang in there!



~ P8nt

[afortuna]

I'm not in line for any of these frames, but have been following the story on a weekly basis since inception. Those latest pics are the bomb. You post it all up, then tell everyone they have to wait 2 weeks. Anyone else need a cold shower?

By the way, is there a new way to feed the LPR? It looks like you have the microline connected to Mr. Coffee. That is gonna get expensive if the LPR decides it would rather have Starbucks.

Nice job P8nt

[CoolHand]

Bwahahahahahahaha!!!!!!!!!!

Happy Thanksgiving Everyone.

I'm diggin' this whole "one step forward, no steps back" thing we've got going on here.

Huzzah's all around!

[going_home]

Progress Yay !

Progress is happening !
Makes me glad no one wanted my spot when I was thinking of selling it !

[zondo]

Progress is happening !
Makes me glad no one wanted my spot when I was thinking of selling it !

Wanting and ability to buy are two different things

[p8ntbal4me]

Guys;

I am sitting in my living room with my fiancee and my daughter right now,.. because its 7:30am on Saturday and its been a rough night

My daughter has a nice case of post nasal drip,.. and what ever she has now,... I have plus a cough (slight though). My fiancee is getting the start of what we have,....

I tell you this so you know that I have not touched the Ripper frame,... I just didnt have time this week.

I have the valve installed and I found my ASA and LPRs I will be using (some how the LPRs went up and walked away last week)

There is a smaaaaaaal problem with the setup (Ryan,.. dont worry!) If you all look at the pictures of the rail, you will notice that it is rather short and indeed will not compliment the ASA that Ryan milled for the Ripper.

I call this to your attention because I want to know how YOU guys would like to see the demo video footage.

Your choices are:
A) Mill the hole in the rail more forward to allow the use of the ASA that compliments the Ripper frame,... placing the LPR in the front as originaly designed.

B) Place the LPR in ANY location that will work for you,... as long as the frame performs 100% as designed.

I will tell you that option A is not going to be a long waited thing. I have ALL the tools to modify the rail,.... and its just a matter of what you would like to see done. Option B IMHO would look "less appealing" in the video.

I give you the option because my rail I was intent on using in the pictures was milled for eyes. So it gave me the chance to complete the marker 100% as shown in Ryans original video. Can I change the rail out? Yes,... Im just looking for some input here.

~ P8nt

[Papa_Smurf]

I don't really have a preference in the demo video, so long as my '05 karta rail doesn't get any changes I don't care...

I've been pretty sick here too. I feel you. Sinus infection....

[CoolHand]

Guys;

I am sitting in my living room with my fiancee and my daughter right now,.. because its 7:30am on Saturday and its been a rough night

My daughter has a nice case of post nasal drip,.. and what ever she has now,... I have plus a cough (slight though). My fiancee is getting the start of what we have,....

I tell you this so you know that I have not touched the Ripper frame,... I just didnt have time this week.

I have the valve installed and I found my ASA and LPRs I will be using (some how the LPRs went up and walked away last week)

There is a smaaaaaaal problem with the setup (Ryan,.. dont worry!) If you all look at the pictures of the rail, you will notice that it is rather short and indeed will not compliment the ASA that Ryan milled for the Ripper.

I call this to your attention because I want to know how YOU guys would like to see the demo video footage.

Your choices are:
A) Mill the hole in the rail more forward to allow the use of the ASA that compliments the Ripper frame,... placing the LPR in the front as originaly designed.

B) Place the LPR in ANY location that will work for you,... as long as the frame performs 100% as designed.

I will tell you that option A is not going to be a long waited thing. I have ALL the tools to modify the rail,.... and its just a matter of what you would like to see done. Option B IMHO would look "less appealing" in the video.

I give you the option because my rail I was intent on using in the pictures was milled for eyes. So it gave me the chance to complete the marker 100% as shown in Ryans original video. Can I change the rail out? Yes,... Im just looking for some input here.

~ P8nt

Do whatever is best for the setup that you will be keeping yourself. The pneumatic system works just fine, and has been proven before, it's only the new electronics that are up in the air.

You do it however you'd like to leave it. No sense in doing a bunch of work you'll just have to redo later.

As for the rest, don't worry about it too much, you've still made more progress in the last month or two than has been made in the last year and a half, so don't sweat a delay, we all knew it would happen eventually.

Get your family and yourself well again, and come back to this when you're all back up to speed.

Christmas is on the way anyhow, and I was going to insist that you not work over the holidays anyway. I've done that for the last ten years, it sucks, and I don't have a family.

Family first man.