Mockup on an RT rail and hyperframe-
Body by itself-
Unpolished on my own grip setup-
And Just finished cutting (4.8oz of aluminum shavings surrounding it)-
out!
-
Deadlywind Chord V1
Chord on BradAGD's E-Mag:
Mockup on an RT rail and hyperframe-
Body by itself-
Unpolished on my own grip setup-
And Just finished cutting (4.8oz of aluminum shavings surrounding it)-
out!-
#1SummaryJudgement commentedEditing a commentVery cool! Keep it up as always!Originally posted by nicad View Post
Posting comments is disabled. -
-
another concept...
dont feel like cutting anything out just yet.
wondering what AO thought of it..?
Original Thread...
http://www.automags.org/forums/showt...rom-Deadlywind...02-11-2014, 07:00 PM -
Ive been quietly working on some stuff for the fast approaching '08 season.
It took some bribing(yes, $$$) to get Colin to go back to the drawing board and recreate his machining code so that these could be done. The Chord v2's have been in the works since the summer! Anybody that has sent Colin a Slug knows that these things take time. 
For those who arent familiar with the Chord, they are the ORIGINAL mag Ripper style body, and arguably the best. Machined from an authen...
03-23-2013, 09:25 PM -
If you are looking to get a Karta or Dallara body kit from Deadlywind (me), Here is what you will need to know and do- #1) You will need an AGD "sluggo" to start with. I do not stock them right now, so you will have to acquire one. As of the time of this writing, RogueFactor has some available. #2) If you want a Karta body kit, you will also need to send in an RTPro or Emag rail. I do not have any in stock. #3) If you want a Dallara body kit, I have AM/MM rails here, so no need to send in a...03-23-2013, 06:05 PM
-
The "Ring and Clip". What are they? In aluminum 'mag bodies, the bolt spring contacts the inside of the body on a ledge just behind the feed neck area. If unprotected, this aluminum ledge will eventually peen out and cause problems. The ring protects the aluminum ledge from the bolt spring, and the clip keeps the ring from falling out when the valve and bolt are removed from the body. Why are they removable? If they are in the body when the body is anodized, the steel ring and c...03-23-2013, 05:03 PM
-
Welcome to the Deadlywind section of AO. Here you will find information and pictures about Chords, Dallaras, and Kartas. Enjoy!
...03-19-2013, 02:22 PM