When a ule is too heavy!!!!!! XULE Carbon Fiber Mainbodies!!!!!!!!!!!!!

Collapse
  • Created by: Xmagterror
  • Published: 12-29-2013, 12:50 PM
  • 0 comments
X
Collapse
  •  

  • When a ule is too heavy!!!!!! XULE Carbon Fiber Mainbodies!!!!!!!!!!!!!

    Ive had plans to make this carbon fiber body for several years now. The center section can be anodized before the body is glued together. This carbon fiber prototype body is a full ounce lighter than my ULE front body i produce out of 7075 Aluminum.....Thats a 25% reduction!!!

    Im also going to do a body that is a full tube of carbon fiber with a bolt on feedneck boss...It will have an aluminum insert inside.

    Both of these designs are just prototypes and will need to be durability tested before they can be released.
    I will snap some better pics out in the light...the carbon fiber looks amazing. Im going to make a minimag front for the body shown. I might also do a front that has a hex pattern instead of round holes.



    Tags: None
        Posting comments is disabled.

      article_tags

      Collapse

      Latest Articles

      Collapse
      • *new Product* Aluminum Minimag Style Body
        by Xmagterror
        Last week i started a thread to see what people would like to see made....the majority of you said you would like to see a aluminum minimag style body. I worked a stupid amount of hours this weekend on this prototype. all thats left to do on this is cut the slots in the front...I will do that tomorrow or wed. Check back for updated pictures. Body specs.... -Made from high strength 7075 aluminum -Threaded for dual angel detents -Uses autococker threaded barrels -Angel feedneck threads ...
        06-03-2014, 07:56 AM
      • **NEW** Custom Warp Bodies!
        by Xmagterror
        Had a few extra blanks so i decided to make up a few custom ULE warp left bodies. This has been a project i have wanted to do for a long time and many have asked for it. Available in Minimag, RT and plain fronts.
        I only made them in the warp left version...a warp right version could be done in a preorder.

        Will post this up soon in the dealers section

        ...
        06-03-2014, 07:53 AM
      • ***1st look** automag rt classic ule bodies, rt length rt front bodies
        by Xmagterror
        As promised i finished the machining on the prototypes. Its amazing how much lighter my red smear rt is with the ULE body, X valve and ULE milling...It cut 11oz. off the weight of the gun!!!!!! I might sell some of the prototypes in my SUPER SALE i will be having on the 1st of January. I am currently crunching the numbers to figure out how much to charge. Watch the Dealers section for the preorder.......I only plan on doing one run of them. Body Features: -Vertical feed threaded for use with ange...
        06-03-2014, 07:49 AM
      • Ultra Light Titanium Emag/xvalve Parts
        by Xmagterror
        Im putting together a phoenix emag for myself. The plan is to make all the stainless steel parts in the gun out of titanium and do some extreme ULE machining..both milling and turning.
        Im also
        06-03-2014, 07:43 AM
      • *NEW* Classic Valve Caps!!!
        by Xmagterror
        Love it or hate it this is my version of a valve cap for a classic valve.

        The hole in the back if for a burst disc to make these safe. caps are side drilled to use a spanner wrench to install them.



        note: the uninstalled cap has not yet been drilled.....the one pictured on the valve is the 1st piece off the mill....
        06-03-2014, 07:41 AM
      • The man with the brass ule body
        by Xmagterror
        Thought i would throw a pic of this up here so you guys could see it. I was hired to make a ULE body out of
        solid brass for an AO member. Nothing ULE about this bad boy!

        06-03-2014, 07:25 AM
      View All
      Working...