Retro AGD
Collapse
-
Paintball.com: Mobster Mash Selects Leaders
For the upcoming Shatnerball III "Mobster Mash" paintball charity game - where "Everyone gets to be the bad guy" - only the best leaders in scenario paintball will do for the likes -
Me and Butterscotch Yo Having some Fun!
The Yo Boys came by today for lunch and afterwards we invaded this embrodery shop that went out of business and left behind all their samples. We decided to get dressed up for you all!!
Stylin' at
AGD... -
Amy "AIM" Schreier
Amy Schreier was a spokes model for the infamous SFL emag back in 2002. She was also the special guest of one of the largest AO chat partys at the time.
... -
Best addition to a mag since Level 10... the proconnect
-
Created by:
manike
- Published: 08-22-2002, 06:46 PM
- 0 comments
Best addition to a mag since Level 10... the proconnect
proconnect! It's the best thing I have added to my guns since level 10! thanks a huge bunch to Tunaman ( [email protected] ) who got them for me (he can get them for anyone). You can't get them over here in the UK easily (I've certainly never seen them often here) but they are worth every penny. They completely solve the problem of the residual gas left that can happen with level 10 when you want to take the valve out and are easy to use. Nice well made bits of kit. Tunaman even had the spe...
-
Created by:
-
Ooh Shiney! Z-grip trigger from Triggernomics.
-
Created by:
manike
- Published: 11-06-2001, 06:59 PM
- 0 comments
Ooh Shiney! Z-grip trigger from Triggernomics.
OK so I'm back from the World Cup now and so after unpacking my camera tried to take pictures of the trigger for you all
It's actually very difficult. This thing is so shiney that I just get glare and reflection off of it with any flash, and in the current indoor/winter night light I can't get any great pictures without a flash... But I took some anyway so you can see it and when I get chance to put it in natural light I will take some more.
I had it in my z-grip but that's a bit battered no...
-
Created by:
-
World Cup 2001: Dual E-mag Revealed.
-
Public Service Announcement SEAO Day III
-
Created by:
Trina
- Published: 10-19-2004, 07:48 PM
- 0 comments
Public Service Announcement SEAO Day III
Yeah Phil...he's got some great lungs...uh...yeah
That was an awesome scenario event, thanks to 24 hour games and Regulators Outpost! You guys did a great job!
Thanks Wyn for the use of your halo...I was shocked to find part of it left in my feed neck though.
As always, it was great to hang out with you again Phil, Tom, Load, Wyn, Sinistarr, Data, "Pornlad" (Nick/Scarface), "blahblahblahwaffles" (Ed), GA Devil and April. And also, great to meet you Punkncat, phan...
-
Created by:
-
X-ball at World Cup & me... (2003)
Who's a pretty boy then?
I was playing with Ignition which has quite a few guys from AO, Brad DeWees and Rob 'Kilaueakid'. Had a blast even though we didn't do so well at this event. Great bunch of guys and as ever it was a pleasure to meet, hang out, and play with them.
Lots and lots of love to Dawn Mills for the pictures!!!
It was after a big soap opera moment... when Big Pete came and slapped me aro... -
-
-
Pictures from today's Tech Class
Guys,
Kayle took these pics at Fox River Games on Sunday. Cliff was there with his super custom babies! These all have either Mags or Spyders inside.
AGD
... -
MANIKE - question re/ Z-gripped Bushmaster
-
Created by:
manike
- Published: 01-14-2002, 07:52 PM
- 0 comments
MANIKE - question re/ Z-gripped Bushmaster
You mean this one...
It's really not that hard to do, just take your time and go at it carefully. It's an advantage if you have a mill at your disposal but can be done with hand tools. The hardest part is breaking through from the top of the frame so that you can connect to the circuit board in the grip. Screw the grip onto a piece of wood via the bottom line screws and then drill down into it from above. A drill press would help! The only pain is working out what to do with the... -
Created by:
-
World Cup 1996: AGD Unveils Automag RT
AGD releases the Automag RT at World Cup 96. Automag RT's serial numbered 41 through 100 were made available for sale here at the World Cup.
http://www.warpig.com/paintball/tour...6/vendor.shtml... -
Atlantic City Gambler's Cup 2001
-
AGD Pride Pictorial/Collage
I got a little bored here at work so I started putzing around with photoshop and I came up with this.
I grabbed all the photo's of us that I could find and started throwing 'em together. Not sure if it turned out the way that I wanted it to but not to shabby either.
Check it out!
... -
Level 10 C&C Extreme Vs Hellfire Paint Fight...
I though it was time to resurrect Fight Club, but this time It's level 10 versus...
We've seen level 10 take on 2-3 bounce fresh paint, we've seen it take on TK's tongue... well now here -
AO Day SE - 2003
A very fun read, check out some of the old school AOers on there....
http://www.warpig.com/paintball/arti...03/index.shtml... -
Super 7 pics
It's Brad here, using Jon's computer. After a few phone calls and some problems, I've got pics up.
here you go
our booth. It's just me and Jon here so we got a small one this time.
here's some more...I had more problems with posting...thanks Clare!
here's WDP's booth. Yeah, it's big but it's the save fluff as always...blah
The fields
... -
A weekend at AGD Europe
Shh don't tell AGD(E) but I 'scooped' some pics while I was there working on the C&C extremes this weekend just gone.
...
Firstly we spent the weekend just sorting out how we would run production on the new extremes's, this means no new fancy gun pics to show you but you get to see my attempt for 'jig of the year award'
It's a masterpiece... It should allow me to write programs from afar for AGDE and also fit all of the parts that require machining for the whole Extreme into one 'easy s...
There are no articles in this category.
Please log in to your account to view your subscribed posts.
Categories
Collapse
Latest Articles
Collapse
-
by Bunny[ATTACH=CONFIG]96288[/ATTACH]
[ATTACH=CONFIG]96289[/ATTACH]
[ATTACH=CONFIG]96290[/ATTACH]
[ATTACH=CONFIG]96291[/ATTACH]
[ATTACH=CONFIG]96292[/ATTACH]
[ATTACH=CONFIG]96293[/ATTACH]
[ATTACH=CONFIG]96294[/ATTACH]
[ATTACH=CONFIG]96295[/ATTACH]
[ATTACH=CONFIG]96296[/ATTACH]
[ATTACH=CONFIG]96297[/ATTACH]
-
Channel: AGD Personalities
05-16-2018, 08:53 AM -
-
by BunnyRandom pictures of AGDJon...
[ATTACH=CONFIG]96199[/ATTACH]
[ATTACH=CONFIG]96200[/ATTACH]
[ATTACH=CONFIG]96201[/ATTACH]
[ATTACH=CONFIG]96202[/ATTACH]
[ATTACH=CONFIG]96203[/ATTACH]
[ATTACH=CONFIG]96204[/ATTACH]
[ATTACH=CONFIG]96205[/ATTACH]
[ATTACH=CONFIG]96206[/ATTACH]-
Channel: AGD Personalities
05-16-2018, 08:16 AM -
-
by AGDAll,
While going through the pics trying to find the Dual Mag I scanned in a bunch of stuff you probably never saw before. Here are some old school pics where men were men and paintball was played in the woods!!
Bet you didn't know we were the first to have a custom semi!!
More of the truck and the cafe we used to setup. The lower picture is when we introduced the fiber grip frame. It was strong enough to pic up a small car!! ...-
Channel: Historic Posts
05-28-2017, 08:50 AM -
-
by BunnyYour Virtual Tour of the AGD U.S. Factory !
The Front of the AGD U.S. Factory in Wheeling Illinois, U.S.A.
Tom Kaye trying to look busy !
Eric, who works with Tom in R&D
The Parts Dept, where Super Dave keep track of everything.
This is Brian in shipping he makes sure your stuff gets to you for the tourney this weekend !
Here is Chicho and ...-
Channel: Historic Posts
02-17-2015, 01:47 PM -