Still have emag problems...

[BigEvil]

It's the 12th man mag, so yes there's been some recent ano work done.

Everything looks fine, and it worked great after I got it back and reassembled it.

See what happens when you do a Seahawks theme? Works great at first then fades off in the second half!

[Rudz]

you know sometimes the markers dont ground right after anno, make sure the marker is grounding right

[robnix]

See what happens when you do a Seahawks theme? Works great at first then fades off in the second half!

Ok, that was funny....

[robnix]

you know sometimes the markers dont ground right after anno, make sure the marker is grounding right

I'll be able to get more air monday. I'll double check all the connections.

[flyingpootang]

See what happens when you do a Seahawks theme? Works great at first then fades off in the second half!

Ok, that was funny....

That's not just funny it's just plain wrong . That's almost saying the only way Seattle will go to the Super Bowl is if they buy tickets......

The only reason I susppect the noid being dirty or the board ground being bad is under a load (valve installed) the resistance may hinder the noids performance

[robnix]

That's not just funny it's just plain wrong . That's almost saying the only way Seattle will go to the Super Bowl is if they buy tickets......

The only reason I susppect the noid being dirty or the board ground being bad is under a load (valve installed) the resistance may hinder the noids performance

I've got a big event coming up next weekend, so this Wednesday I'm going to head over to a local indoor field after work to test and tune all my gear. I'm tired of running out of air to fix this. I'll get the noid and the connections checked out first and go from there. Hopefully I'll be able to get some internet access while I'm there so I can post my progress.























p.s. yer all a bunch of hawk haters!

[flyingpootang]

p.s. yer all a bunch of hawk haters!

Is that what they are?........I always thought they where SeaGulls Oh well some say patato some say potato.

Any progress on the Emag?.

[robnix]

Is that what they are?........I always thought they where SeaGulls Oh well some say patato some say potato.

Any progress on the Emag?.

Not yet. I'm getting a fill on the way home tonight but may not have time to work with it. I'm shooting for Wednesday at an indoor place so I have a good source of air.

[robnix]

Video of it firing with air, starts off fine at 16bps, then dies and hits around 8:

<embed src="http://www.youtube.com/v/AUfQX7gXa2M" type="application/x-shockwave-flash" width="425" height="350"> </embed>

[robnix]

Video of it firing with air, starts off fine at 16bps, then dies and hits around 8:

<embed src="http://www.youtube.com/v/AUfQX7gXa2M" type="application/x-shockwave-flash" width="425" height="350"> </embed>

Any ideas on why it dies at the end of the vid? Goes from 16bps to about 8 before I let go of the trigger.

[Piranti]

Kinda sounds to me like the Battery is not holding a charge or is not fully charged. I would check voltages coming from the charger and what you 'think' a fully charged battery should be then check for shorts with a DMM as well. I had a similar problem with mine til i figured out that the Battery was not charged fully.

[robnix]

Kinda sounds to me like the Battery is not holding a charge or is not fully charged. I would check voltages coming from the charger and what you 'think' a fully charged battery should be then check for shorts with a DMM as well. I had a similar problem with mine til i figured out that the Battery was not charged fully.

That's kind of what I was thinking. The battery had a full charge, I left it plugged in for about two days. I'm going to double check the connections, and check the charger and battery out.

[Piranti]

Need to measure the output of the Battery itself and the charger. My old charger would show a green light showing a 'full' charge but the battery output was low and the output on the charger was very low so replaced the charger and everything was fine after that.

[robnix]

Need to measure the output of the Battery itself and the charger. My old charger would show a green light showing a 'full' charge but the battery output was low and the output on the charger was very low so replaced the charger and everything was fine after that.

I have a cheap digtital multimeter handy, what should the battery and the charger output be?

[Piranti]

If i recall correctly the charger should be at about 22volts and the battery should on a 'full' charge be at about 19-20 volts. I think theres a spost somewhere in here what it is supposed to be. Emag batteries should at least be at 18.5 on a full charge