help explaining RPG chimera frame.

[knownothingmags]

i have chimera frame looks to be never used.
how do i get it to be a sleeper pneumag?
because the bottom of the frame has that hole in the bottom?
<a href="http://s741.photobucket.com/albums/xx60/thetoolishere/?action=view&amp;current=100_0557.jpg" target="_blank"><img src="http://i741.photobucket.com/albums/xx60/thetoolishere/100_0557.jpg" border="0" alt="Photobucket"></a>
are you supose to put pneumatics in it or electronics?

i have this insert that mag79 gave me he told me to use this insert, he said i have to use liquid nitrogen to get it to be properly installed.
<a href="http://s741.photobucket.com/albums/xx60/thetoolishere/?action=view&amp;current=100_0565.jpg" target="_blank"><img src="http://i741.photobucket.com/albums/xx60/thetoolishere/100_0565.jpg" border="0" alt="Photobucket"></a>
how am i supose to get this inserted properly into my frame and have the sleeper mod work?
pleas let me know.

thankyou,
knownothingmags.

[Ando]

ROFL...We need a pic of this

[mag79]

could it be a 90* angel frame

[knownothingmags]

so i am stupid it does have the spot for the mechanical setup.
but the new edited post should show you my troubles


let me know.

thankyou,
knownothingmags.

[Madmarx]

could it be a 90* angel frame

I don't think so... mine is exactly the same.

[mag79]

Ok your orginal question was about the sear pin.

Look at this thread:

http://www.automags.org/forums/showthread.php?t=231072

That hole gets tapped with a 1/8-27 npt tap, this is where your lpr gets screwed into.

I will post more pics

[mag79]

I mill the bottom of the frame to remove the grooves next to the hole. It also allow the frame to sit flush with the cp on/off.

The inside of the frame is also milled to allow better clearance for the lpr

I can mill your frame and install your pneumatics. You can contact Loguzzzzzz he might be closer to you, he can do it as well.

[mag79]

Hope these help




How to mod you cp on/off

http://www.automags.org/forums/showthread.php?t=232154

[SSP REAPER]

It's junk... throw it out and buy a real frame

[punkncat]

You know Alex that instead of posting pictures and trying to be helpful, you could be packing up some gear and coming out to shoot some people tomorrow. It would be good for you.

[mag79]

You know Alex that instead of posting pictures and trying to be helpful, you could be packing up some gear and coming out to shoot some people tomorrow. It would be good for you.

i'm hoping you'll will still be there by 4

[punkncat]

I kind of doubt that I will be there that long...you could always play hooky...or show up, clock in, sneak off and play for a few hours and then show back up and clock out to come home. No one would notice.

[knownothingmags]

so i dont need the lpr extender?

the silver aluminum peice?

let me know please.

thankyou,
ryan.

[mag79]

so i dont need the lpr extender?

the silver aluminum peice?

let me know please.

thankyou,
ryan.

no, you dont need it if you mill the inside of the frame

[Rudz]

After you drill and tap for an lpr and get someone to install pnuematic, it would just be cheaper to find a Magnus M90 frame

The Pnuematics drop right into the M90 frames with out trouble

After all the drilling and tapping and working to put into that Chupacabra frame, you could have just an M90

But if you determined to use that frame, id contact Loguzzzzz/ Practice Target to do the pnuematic install