OK, I'm at a dead end

[zondo]

if you are having bolt stick it is either your ball detent is in to far or your lvl10 is not tuned correctly. is your spring extending past the face of the bolt?

Seconded... Start with the level 10 then work on the detent.

[captian pinky]

if you are having bolt stick it is either your ball detent is in to far or your lvl10 is not tuned correctly. is your spring extending past the face of the bolt?

[OPBN]

Check to make sure your detent isn't in too far.

[BTAutoMag]

My mag wont stop breaking paint!

here's the setup and ive clearanced the carbon fiber and got a new prophecy loader thats set up on its highest speed.

the body is heavily modified and ive noticed a couple sharp spots that have been polished and smoothed over.

switched to a larger bore barrel retuned the lvl 10... twice... but at this point im open to anything



EDIT: after the video, a good cleaning and a new hopper with fresh batteries I tried again. 3 balls broke in a row and then I had bolt stick... when i say bolt stick... the bolt was all the way FORWARD!