emag xmod 1.8 question

[knownothingmags]

Does it fire every time in mechanical mode? If it fires in mechanical mode, but not in electronic mode, it would indicate a problem with the electronic part. If it has issues in mechanical mode as well, then your problem is valve related.

The emag pin length is 0.712".

Is your air line allowing a good air flow? A restriction in the air line or within the valve could restrict the air flow and cause a mechanically predetermined time to charge before the valve can fire again. Is the sear actually fully resetting?

Another issue might be that your solenoid might not be generating enough force to fully pull in the plunger. Have you checked your solenoid plunger length to be 3.005"? Have you checked that your plunger rod hasn't gotten bent?

Yes mechanical mode is flawless.

I'll check the plunger and its length. Thank you.

How do I measure plunger length

[athomas]

Does it fire every time in mechanical mode? If it fires in mechanical mode, but not in electronic mode, it would indicate a problem with the electronic part. If it has issues in mechanical mode as well, then your problem is valve related.

The emag pin length is 0.712".

Is your air line allowing a good air flow? A restriction in the air line or within the valve could restrict the air flow and cause a mechanically predetermined time to charge before the valve can fire again. Is the sear actually fully resetting?

Another issue might be that your solenoid might not be generating enough force to fully pull in the plunger. Have you checked your solenoid plunger length to be 3.005"? Have you checked that your plunger rod hasn't gotten bent?

[knownothingmags]

ok so my xmag is being funny
it has lvl ten installed no shims
emag onoff i think,
oh yeah and a red spring.(i have tried with the gold, same issues.
how long is an emag onoff pin?


runs xmod 1.8
FIX is 0
Dwell is 15,
ROF is 10
its on SEMI
no ace, ace is off

the issue is,
it fires but not every time it reads the magnet.
you can hear the click everytime.
its almost as if it fires in a rythem. NOT as fast as i am pulling the trigger

yes battery is charged and is hold a great charge

OH and when it fires no issues, no leaks and such, no bolt stick either. when the valve fires it cycle perfect.
the bolt spacer is the right one the loosest without leaking.

any and all help would be great.
WORKING ON A VIDEO

thankyou,
KNM.