** Official Level 10 Problems Thread **

[GA Devil]

OK I installed my lvl 10 and got iy working great with middle spring 2 shims and the2 band carrier. Shot about 1 hopper of paint and developed a leak down the barrel. Figured the oring broke in so switched it to the next size down carrier. Still leaked...shot it about 5-6 times...quit...shot 5-6 more..started leaking down barrel again. So on and so forth. Do I need to drop another carrier size or maybe add or drop a shim?

[Blurry]

lvl10

put in the size tighter instead try that or remove a shim that might work?

[GA Devil]

K I dropped carrier size and with a med spring was shooting 306. any lower on the adjustment it wouldnt even fire. Then switched spring like I read to small. Wouldnt even fire taking velocity knob all the way up leakin out the back. The switch between 3 carriers goi each way. It either was leaking down barrel or out the back or shooting in the 300's with no leak. After another 1 1/2 hours of time I could have been playing I still didnt have a working gun. So had to borrow 1. Any ideas before I give up on it? Its a good gun and would hate to take the time and money I have into and pitch it. I tried everything I could think of to no avail

[GA Devil]

Well just got of the phone with Tech support, and he said to replace my reg piston. So I ordered a new 1. He said by the serial number (28662) and the spring pack (instead of spacer) in my power tube told him that I had a very old mag. Good news and bad news I guess. LOL I own a dinosaur and possibly have it up and running before our tourney. Hopefully.

[FreakBaller12]

up to the 2.5 carrier leaks
i have goen thru .5-2.0 and all of them are bolt stick
add shims i assume
i just changed the pt oring

i got a barrel leak and when i try n shoot it clicks
HELP ME!

[mixwell2]

has AGD noticed problems with the x-vavle and the benchmark frames.
my marker won't "cock" when i turn on the gas. I turned it up nut nothing changed... how many turns should I make when turning up the velocity

I just dgassed my gun and when I pulled out the x-vavle the entire on/off assembly poped out "gas pressure was released"
what up?!!

[pb4jc]

No Shoot

I just got a used lvl 10 and on a RT valve i put in on my gun and the gun doesn't shoot at all when i pull the trigger it doesn't his like it's leaking when i screw the velocity all the way in it doesn't leak. I don't have a clue about lvl 10 so if you could help in any way i would greatly appreciate it.

pb4jc

[$tevo]

i recently bought a lvl 10. i installed it last night, and got my tank filled today. it started out leakin so i took a shim out. and put in a carrier with 1 groove instead of 2. its not leaking anymore but it also does not shoot. is that the lvl 10s fault or??? the trigger is tight from the air, but its not firing, plz help

[C_22]

Arghh.... chops!!

Help,

I have my new Emag with LX (1.5 carrier, 2 shims, small spring) and I'm using it with a HALO B and ULE mb and when I rapid fire in E mode can't empty my hopper before I chop. happens all the time. Why am I chopping paint? What instruction did I not follow?



Help!

BTW: I tried 3 different brnads of paint and the results are the same.

[Danny Trigg]

X Valve & Halo B

Thanks for asking!
Just installed a X Valve, Lvl 10 in my Mini Mag., and I wanted to pick up performance from my View laoder, so I upgraded to a Halo B. I used the original spring like recommended. I unloaded a full hopper in the back yard and all was well. Went to play at our local field and ball chop all day long. Switched back to View loader after a good field cleaning and all was well until 2nd hopper. Compressed air was good as I never let tank drop below 2000. Any ideas on next move??

[Dye Man]

help

I need help. i am a store and i put in lvl 10s in all the time. but i cant get this one to stop leaking please help. it leaks out the back. and i have tried everything.
please help.

[ICOM]

MY lx is not set up right. I tried med spring and use long spring mostly. MY gun sprays paint crazy sometimes or chuffs crazy. I use warp on a xmag. 2 shims.
it does not leak,chuffs and sprays of paint....

[mororless]

Am rebuilding a mag I got for $50..new ANS valve...new benchmark double trigger new CP barrel..was about to order the LVL 10 tonight but the info sheet from AGD says will not fit rental mags...well that was what mine was in its abused former life before I rescued it..any help please..

[Evil1]

LX Velocity

Barrels do seem to help alot w/ the LX. I recently purchased a ULE main body and a 16" J&J ceramic and the velocity was real wacky and the accuracy was so-so, I then switched to the same barrel but 12" length w/ accuracy and velocity both staying very stable.

[JG2790]

I'll link to the post of my LX problem.

Also, I've found 2 small additional problems aside from the ones in my seperate post. Keep in mind that I found these problems after I found the ones listed on my post. I gased my gun up once and it leaked for alot, I degas, then regas, then the leak no longer occured. It might be minor, but I just don't want my LX to go bad on me on the field. And the second problem is...sometimes when I gas up my marker, and then I try to unscrew my tank to degas, it seems to be really hard to do so, sometimes it takes alot of effort and sometimes it uncrews with no problem, and I'm almost positive it's my E-Mag since it has never happened like that on my Cocker. Also, I posted in my post that my tank is about less than 1000 PSI left on the gauge...I still haven't gotten a refill so I've been trying to diagnose these last few problems with tank that has about 1000 PSI left. Any help would be appreciated, thanks.

http://www.automags.org/forums/showthread.php?s=&threadid=114196

-JG2790