ALL about the WARP-FEED

[sparkyman215]

I have got some problems with my Warp feed and hopefully someone here can help me out. First off the warp feed is in amazing condition. I bought it about 3 years ago and only used it about 3 times and then it stoped working and has sat in my closet ever since. Now I want to sell it but want to get it working first.
Now to the problems, it seems like my vibration sensor has stopped working because it will spin just fine when I press the white button but will not spin by vibrations. I have checked the pins and they are still in the factory setting and also I have turned the sesitivity all the way up. I have also looked for anything that is loose and there doesn't seems to be anything wrong. What else do I need to check. Thanks for all the input.

Alex

[secretweaponevan]

Do you have the jumper on the bottom-most pins?

Here is the manual in pdf format.

http://www.airgundesignsusa.com/downloads/WarpInstructions.pdf

[sparkyman215]

yeah that was the first thing that I checked. It was still there.

[Lufen]

I tried doing a search for hooking up a warp to a SP-1 but couldn't find anything. I am doing a saw mod and I am placing the warp feed in the saw ammo box and I need to know the proper way to wire the warp into the trigger. I have seen the manuals and diagrams on AGD's site but that is for Intelli frame. Any help would be greatly appreciated.

[KrazyJ]

How loud are the wrap feeds?

[phatty123]

I tried doing a search for hooking up a warp to a SP-1 but couldn't find anything. I am doing a saw mod and I am placing the warp feed in the saw ammo box and I need to know the proper way to wire the warp into the trigger. I have seen the manuals and diagrams on AGD's site but that is for Intelli frame. Any help would be greatly appreciated.

If you do it your going to have to fabricate it yourself. With a micro switch or something. You could just use the vibration sensor and not worry about the intelli link.


-barry

[frankenskid]

I am looking for some help with hooking my e-mag to my warp. Can anyone help me with some diagrams, or detailed instructions, and what wire I need to buy or fabricate to connect these two please. Thanks

[secretweaponevan]

I am looking for some help with hooking my e-mag to my warp. Can anyone help me with some diagrams, or detailed instructions, and what wire I need to buy or fabricate to connect these two please. Thanks

Download this: http://www.airgundesignsusa.com/down...arp2Angel1.pdf
and just tap into your solenoid wires like the manual shows tapping into an angel's trigger wires unless someone suggests otherwise.

Then if you need help setting up your warp, download some manuals here: http://www.airgundesignsusa.com/manual.shtml

[teamtom]

max voltage?

What is the voltage range that is acceptable for the molex plug in for the warp feed? I know the unit should be powered by 12v or less but all I've seen is 5v for the electronic switch, what is the max that I can use and still keep the unit dependable? Also, judging from the intelliframe manual, I can just set up the unit so just continuity between two wires will trip the feeder? http://www.airgundesignsusa.com/down...ntelliwarp.pdf

I'm not a paintballer, just a tank guy with a paintball cannon...www.rctankcombat.com

[frankenskid]

Download this: http://www.airgundesignsusa.com/down...arp2Angel1.pdf
and just tap into your solenoid wires like the manual shows tapping into an angel's trigger wires unless someone suggests otherwise.

Then if you need help setting up your warp, download some manuals here: http://www.airgundesignsusa.com/manual.shtml

Thanks for that, I will look into it. Does anyone else have any better ideas?

[frankenskid]

So just so I know in order to get the warp to feed based on vibration, you need to have the jumper only on the lowest one, and none of the other prongs?

[secretweaponevan]

So just so I know in order to get the warp to feed based on vibration, you need to have the jumper only on the lowest one, and none of the other prongs?

Yes. Then adjust the blue potentiometer clockwise until it spins, then back it off to the point that it will spin only when you shoot, or it will spin all the time and use up your batteries.

[frankenskid]

I tried that, but still no spin on vibration, I have even tried to tap on the warp to get it to spin with that configured as above, can the vibration sensor burn out? If so, can it be replaced?

[secretweaponevan]

I tried that, but still no spin on vibration, I have even tried to tap on the warp to get it to spin with that configured as above, can the vibration sensor burn out? If so, can it be replaced?

Here is the manual from AGD's site just to be sure that you have the jumper set correctly:

http://www.airgundesignsusa.com/downloads/WarpInstructions.pdf

If you turned the potentiometer all the way clockwise until the warp spun, then it isn't the pot., but probably the sensor.
I was just on Tuna's site today and saw the sensor there for $6.00.

http://www.tunamart.com/?c=33&p=49

[Legendary Matos]

I just got a Warp Feed and I'm not too mechanically inclined with this stuff so i was wondering how to take off the jumpers to set the dwell without pulling out the whole board.