Help! I'm trying to install a ULT in my X-Valve mag, and I'm having trouble. I'm only using 1 spacer ring, and the thing is running away full auto when you touch the trigger. I had a ULTed mag a while back and it was not like this. What else can I do?
-
www.flurryindustries.com
http://www.geocities.com/interceptor911/frontpage.html?1055821493343 -
hmm, normally when its going full auto you have a lot of shims in it or a high input pressure, 950+Originally posted by Interceptor
I'd suggest oiling it and changing the shim count until it works. you have to find the right amount.-fully upped mech mag (magzilla) www.havoc-online.com
-upped 68 mag (class) My Feedback AIM = nate2k191
-live in peace TK-
AO-TXComment
-
I'm down to one shim right now and its still going nuts!www.flurryindustries.com
http://www.geocities.com/interceptor911/frontpage.html?1055821493343Comment
-
I know putting a ULT on a smartmag valve is not recommended, but could i ask why it isn't? In other words, would it just be slight disadvantages or major malfunctions? I guess it'd be better to just bite the bullet and save up for an xvalve huh...Comment
-
Im getting terrible runaway on my mag and was told it is probably a ULT problem. Took it apart and found 4 shims. Popped 1 out but in but Im still getting runaway every time I pull the trigger. I ran out of air before I can test it w/ less...how many more shims should I remove before I can eliminate ULT as the problem?Comment
-
It is not hazardous to use a ULT with a classic style valve. The disadvantage is the increased ease of shortstroking. Some can do it with much success, others can't.Originally posted by DaemonZ-man - "I would say we are not so much proud as...viscously loyal. Dissing AGD in earshot of AO is like throwing rocks at a bees nest... a big bees nest... with millions of freaking bees that have modded AI software, maneuverability upgrades and rocket launchers."
the Best Page in the Universe
My Ebay Feedback
My FeedbackComment
-
Apparently out of tolerance ULT on/off
Ok, so after much fideling with my X-vavle, thinking my problem was bolt stick, a tech at a local store tried swapping my ULT on/off with a standard RT on/off, and voila, no more loss of pressure behind the trigger. Looking at the ULT on/off, we noted that somehow 7 shims had been installed prior to delivery to me. Putting fewer and fewer shims on it did not remove the loss of trigger pressure issue, and eventually caused a leak.
So, my question is, how should the gun be performing now, with the standard on/off? I find that, besides a heavier trigger-pull, and harder punch from the RT, it is extremely easy to short-stroke, in fact, any attempt to shoot faster than about 10 bps results in short-stroking. Is this normal for the standard RT on/off? Will reoiling/ use of gun grease on the sear only, help? And if I order a new ULT on/off, how likely am I to have the exact same problem as before?
"Markers invariably break on two occasions: when you brought your backup, and when you did not bring your backup."Comment
-
does anybody know if a Hyperframe on/off is as light (trigger pull) as the ULE kit? I'm considering buying a Spydermag frame...BPS - Baller's Pro Shop - [email protected]- "Hellspawn" WDP Angel LED 99
- "Foxwood" WGP Autococker Bob Long Ironmen RF 97
- "Kenobi" WGP Autococker E-Blade blue VF 2k2
- "Raider Nation" AGD AutoMag CF ULE Hyperframe LX Hurricane
- "Gray Ghost" AGD ReTro Mag CF High Rise LX
Total Freak - Tips: 12" AA black, 10" Boomstick black
Bidness with Dover - FeedbackComment
-
I don't think it is. It also wears away the bolt.Originally posted by DoverLast edited by wjr; 06-13-2006, 09:17 AM.Comment
-
Pic from PG-1
Peace OutComment
-
wowzers
Old thread....
Is BlackVCG even in the game anymore?
StygSometimes It's Good to be EVILComment
-
That's a good question. I haven't seen or heard of him in a while.Originally posted by StygShoreComment
-
question... i'm thinking of getting the ult, but i still wanna keep some of the reactivity, so if i wanna do this, i gotta put in the maximum # of shims to start out with?Comment
-
Sick of searching
I have a x-valve all tuned and threw the ult with all but last shim and get 1-2 shots and then won't fire
. Should I start using LV Shims too? it seems like too much. I still have Tiny Black o-ring in Baggie. Am i supposed to install that as well? 
Did anyone have to adjust lx or x-valve after installing ULT? Have Nitro Duck Adjustable Tank set at 800psi maybe little more. Seemed to get worse as i added more shims 
( No Runaway ) Rear screw for valve Needs to be real tight? Haven't oiled on\off yet Should I? valve has been oiled very recently. I think that all my Questions- Thanx
Comment
-
no answer
Is anyone gona answer? Caues my bolt is stickin now after all shims are in( it sticks after a good amount of shots ) its defin. not my LX caues that was workin perfectly before this. Unless you have to adjust it with this being in there( Which would be helpful if SOMEONE WOULD ANSWER
.
Comment
Comment