Qloader Dedicated Automag Body

[Rick927]

I went with a single detent from TDC. This version would be around $100 more than a standard one on my website and they start at $1000. As shown here I have about $1400-$1500 into it.

This was just a proof of concept before I spent the money on having the bodies and grips done at the CNC shop like my drawings above. That model will of course be far less. I would like to keep the price point in the range of $300-$400 for a drop-in upgrade for any Automag.

[Swamp Thing]

Interesting

I would be interested in a 300-400 body that I can put any valve on and use.

It might be interesting enough for me to break out my Q-loader again. The bigest issue I had with the Q was the hose and witout any hose to foul things up it might be reliable enough to use.

Swamp

[maniacmechanic]

I went with a single detent from TDC. This version would be around $100 more than a standard one on my website and they start at $1000. As shown here I have about $1400-$1500 into it.

This was just a proof of concept before I spent the money on having the bodies and grips done at the CNC shop like my drawings above. That model will of course be far less. I would like to keep the price point in the range of $300-$400 for a drop-in upgrade for any Automag.

link for website please , ( There are a zillion reaper sites )

[vf-xx]

http://reapercustompaintball.com/

is this not it?

[Rick927]

That's the one.

[om3n]

That's the one.

could you post a video of you shooting your gun? This really is sick

[Rick927]

Sure, once the weather warms up I will get some test fire video

[Rick927]

All done. I went ahead and made the standard stock air-through with some macro-line fittings. Ahhh...a Qloaded Reaper M4 in it's natural habitat:

[Big'n slo]

I love it!

[wico90]

i agree with druid, a M203 shell would look amazing on the q-loader..could prolly be made for fairly cheap too. I think thats all you need to complete the look

[Ando]

I'll buy one

[Rick927]

Thank's guys. Maybe I will do a mock M203 cover on the pods or something like that.

[om3n]

Thank's guys. Maybe I will do a mock M203 cover on the pods or something like that.

how does the trigger work? did you just make a really long sear rod?

[Rick927]

My custom designed trigger engages the sear just under the on/off pin similar to the Emag system. It bypasses the trigger rod all together while maintaining enough bounce to keep from chuffing or short stroking. The sear is stock, other than I took off the lower trigger rod arm. I just need to fine tune the LV10 a little more. It is still heavier than I prefer but that's a minor detail I will work out after field testing.

[trigger090]

alright well props go out to you for actually making this happen. but i still have a question, How are you going to air this up? are you gonna put a rail and asa on the bottom of the trigger frame or are you going to run a remote to your back? That does look amazing though. I also agree a m203 shroud would help a lot to.