ego mag build

[RT Lover]

If you test the solenoid, not connected to a board, don't leave it connected to the battery. A switch is nice, but not necessary for testing.

o hell i was going to hook it to the board y hook it to just a batt? man getting close im gonna need to know what settings to have the frame on? ty

there r many different fittings but i want to try a 90* which one will work best?

http://www.pneumadyne.com/threads-elbow-fittings-p-2431-l-en.html

[RT Lover]

guys didnt forget about me did you ?? ^^^^^ lol

[renie]

Not forgotten having problems access the site at the moment have to use a proxy server

[renie]

One of the 1st 2 on that page all depends on your tube id personally go for the second one and have tight for on the tube

[RT Lover]

my noid isnt going to work

One of the 1st 2 on that page all depends on your tube id personally go for the second one and have tight for on the tube

this noid is a no go renie, its to big for what i want. I bought it because it was cheap and i thought i could make it work but its to big!! i have no where to put it, im trying to use what i have here and not super fancy parts i just want to make a few borrow markers. with input on one side and out on the other it cant sit in my rail ule milled pocket. I have this old benchmark rt classic rail i wanted to use but even then on other rails i couldnt use a emag batt pack....

i need to go to a different noid what are my options??

Thanks man!

[renie]

smc is the best route for compactness

[RT Lover]

any certain smc's? on your mag where you used the 3 port noid where did you put it at on the marker, it cant be that much smaller than my 5 port?