mag boards

[BigEvil]

Use a m3 set screw to close off the unused port...


***I have a bunch if you need some.

[Pneumagger]

Scott, thanks for the tip.

On a side note regaurding the little HALO 2 Logo....

Would people be interested in having the H2 logo milled out of a Slug body? I was thinking of milling a Slug to look like a ULE, but have the H2 logo raised from the body (like on that lid) on either side of the mag. That H2 Logo is actually curved along the top to match the box lid's curved quarters... and the H2 logo could easily match the curve of a mag body.

Also, the logo could be anything... GOW, H2, AO honeycomb, etc. All that is needed is to swap out the sketch file in the CAD program as long as they are about the same size.

[behemoth]

Scott, thanks for the tip.

On a side note regaurding the little HALO 2 Logo....

Would people be interested in having the H2 logo milled out of a Slug body? I was thinking of milling a Slug to look like a ULE, but have the H2 logo raised from the body (like on that lid) on either side of the mag. That H2 Logo is actually curved along the top to match the box lid's curved quarters... and the H2 logo could easily match the curve of a mag body.

Also, the logo could be anything... GOW, H2, AO honeycomb, etc. All that is needed is to swap out the sketch file in the CAD program as long as they are about the same size.

When the hell did you get a slug?

[Nick E]

You know what also would be cool? would be to do a litlte honeycomb engrave into the side of regular ULE bodies, where it's flat, by the feedneck. I don't know how much you'd charge for that, but if it was cheap(cause I think you'd have a problem milling for eyes and such later on) I think you'd ge ta pretty good responce..
just a thought.

nick

[Pneumagger]

I figure slugwill be available someday.

Also... this is AO - there is never a good response.

[armyboot]

Boy are you making me envious! I just placed an order for that noid you speak of, and I'll probably be purchasing a chimera frame here shortly. Now I'll just need to purchase an mpa3 and LPR.

You wouldn't happen to have any pictures of your setup with all the connections going into the solenoid?

Thanks again for the inspiration! Can't wait to see your final product.

[Zneaky]

Pneumagger,

Here is another thought: When Scott H did this with a ion board and noid, he had to install a t-fitting with a little red camp on it, with a pin whole in the cap. He did this so some air would vent, that way the qev would see the drop in pressure and vent. When I did the same set up, I needed to do the same, even with a qev.

Does the soleinoid you are using vent when it closes, or does it keep the pressure? Will this set up require vent holes?

Thanks,

Z

[FinchMan]

it's the one from the ASP site the BE also used: http://www.airsoldier.com:8080/cgi-b...Code=SOLENOIDS

sorry to confuze

Wouldn't you want to use the SMC SY113A-SG-PM3 instead? If I read the spec sheet right, the 113 is normally closed where the 123 is normally open.

http://www.airsoldier.com:8080/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=AOS&Product_Code=SMC-SY113A-SG-PM3&Category_Code=SOLENOIDS

[Pneumagger]

Wouldn't you want to use the SMC SY113A-SG-PM3 instead? If I read the spec sheet right, the 113 is normally closed where the 123 is normally open.

http://www.airsoldier.com:8080/cgi-b...Code=SOLENOIDS

That's a good point... but I think I'll just close my eyes and ignore that statement - then it won't bother me.

good day.

[Zneaky]

I ordered the one Captian Pinky Recomended, SMC S070C-SDG-32 it has 3 ports, in, out, and exhaust; and it's smaller. Should do exactly what the MSV-1 does. i'll let you know when I get it.

Z

[Pneumagger]

I don't know what I ordered anymore... I just want it to come in already. I guess I'll deal with whatever it is when it gets here.

[wjr]

I ordered the one Captian Pinky Recomended, SMC S070C-SDG-32 it has 3 ports, in, out, and exhaust; and it's smaller. Should do exactly what the MSV-1 does. i'll let you know when I get it.

Z

Are you using a ULT? If you're not, then it most likely won't work. They're only good up to 70psi.

That's a good point... but I think I'll just close my eyes and ignore that statement - then it won't bother me.

good day.

Wait... a normally open solenoid won't work at all, right? If I understand the term correctly, then the air constantly flows through the valve when it's deactivated, and stops the flow when activated.

Am I right?

[Zneaky]

Yes I am using the ULT. Should be fine.

Z

[Zneaky]

Wait... a normally open solenoid won't work at all, right? If I understand the term correctly, then the air constantly flows through the valve when it's deactivated, and stops the flow when activated.

Am I right?

SHHHHHHHHHHHH!!! You are taking him out of his happy place.

(Pneumagger: "I hope they send me the wrong one, I hope they send me the wrong one.")

[armyboot]

Phew, thank goodness I didn't order my noid just yet.