can't understand ballers

[Smoothice]

dont forget the ones with out websites.

yeah lets all ask cyberave how helpful roguefactor has been to him.

[RogueFactor]

See, the thing is that I tell Jay the same things. If his stuff was so aweful then you wouldnt be trying so hard to tear him down.


Nice pic. Its being made into a banner for Tunaball especially for Jay.. You coming out to see it in person?

LOL. Tear him down? He showed up here, probably after you spoke with him.

I laugh, I remember you told me you were only being friendly with Jay because he was donating the $1000 to Tunaball. So you had to be in his good graces. And it is awful, and its only the tip. Its interesting how the people you are now friendly with were all the ones you talked smack on. All the crap you talked on Beemer, Army, CoolHand, RRFireblade, rabidchihauhau, XmagTerror, ...this list is long. Your own teammates like HomeLandDefender. Rudz and Behemoth. And these are guys you call friends. Youve even talked smack on your own family and your wife. And you are going to preach to me? LOL.

Those you treat well depend on the way the wind is blowing on any given day.

ANd you convienently side stepped the question about calling all of these people liars by trying to start some trouble between my and Jay. I will let everyone else make up their minds about that.

For someone who preached to me for months about how bad AO is, and how there are so many bad apples here ruining the bunch - its funny how now the consensus is that you are the bad apple.

LOL. I didnt call all of these people anything. Those are words you are attempting to put in my mouth, which is why the question is ignored. And the trouble between you and Jay has been there long before you and I ever began speaking.

Nobody preached to you. The stuff said about AO was stuff you said, heck I can quote you if you like. Dont try to make it out after the fact that you had good things to say about this place...of course until afterward when you came back.

[Smoothice]

someone please save a copy of this thread before anything happens to it. If I knew how I would.

The truth is in these pages.

[jay8541]

I could've SWORN that the field strip screw is the main thing keeping it all aligned. You know, since it screws into the valve. You know, since it's a mechanical connection? You know this right? Wow, I didn't know who the bad guy in this thread was, but I sure found out! And man is bashing him EEEEEASY!!!



Let me help you out dude. This is a little fireman's trick. If you SAY something annoys you, then you've only doomed yourself to be constantly haunted by it. Punctuation helps too.

oh man i know he does it to get me going but It does not matter do to the fact i wont stop anyways but you are 100% correct lol and anything he says would aggitate me enough to speak up

i know I can not spell and have many run on sentences lol

[RogueFactor]

Seriously... who are you fooling with that comment sean besides your self.

There is no need to fool anyone. Its the truth.

[RogueFactor]

I could've SWORN that the field strip screw is the main thing keeping it all aligned. You know, since it screws into the valve. You know, since it's a mechanical connection? You know this right? Wow, I didn't know who the bad guy in this thread was, but I sure found out! And man is bashing him EEEEEASY!!!

You mean, the bushing that keeps the field strip screw from moving?

[CoolHand]

Bwahahahahah!!!!!!!!!

Man oh man, I had an EPIC weekend at UMR during St Pat's, and now there's an EPIC free for all thread on AO that's got mud slingin' in every direction.

This is like one of those 50 guy brawls you run across sometimes and just want to wade right into (or at least I do ).

Glad I happened to have my safety glasses on though, that mud stings if it gets in your eyes (plus I kinda look like a raccoon now ).

[Lohman446]

someone please save a copy of this thread before anything happens to it. If I knew how I would.

The truth is in these pages.

The truth has been on these boards, in various forms, for years now.

[nmib]

The truth has been on these boards, in various forms, for years now.

that is the first thing EVER ive read from you that i agree with. damn.. this thread is epic.

you have just earned your 7th useful post

[michbich]

You mean, the bushing that keeps the field strip screw from moving?

As far as i know, if you have wings, it's not going anywhere.

[thomas]

This is awesome! Rabid makes a thinly veiled post complaining about pneuframes, Rogue pipes up just to spew some of his holier than thou BS and gets called on it by the masses. Classic!

Rogue I hope your flash game site works out, sorry you're to busy to actually get a site going that shows actual products for sale.

[going_home]

Bwahahahahah!!!!!!!!!

Man oh man, I had an EPIC weekend at UMR during St Pat's, and now there's an EPIC free for all thread on AO that's got mud slingin' in every direction.

This is like one of those 50 guy brawls you run across sometimes and just want to wade right into (or at least I do ).

Glad I happened to have my safety glasses on though, that mud stings if it gets in your eyes (plus I kinda look like a raccoon now ).

Who's taking bets on what time tonight this thread gets locked heheh ?

[CoolHand]

You mean, the bushing that keeps the field strip screw from moving?

The bushing doesn't stop the field strip screw from moving.

Am I going to have to draw you a visual aid?

The valve and rail locate to one another via that great huge radius groove running the length of the rail. Bushing or no, when you clamp those two pieces together, they line up.

The frame is located to the rail by two screws, the front and the rear, and the rail bushing (to keep things lined up when the rear screw is gone during a field strip operation).

If you remove the rail bushing, the frame still locates to the rail by those two screws, in exactly the same way it did before, but it all goes pear shaped if you remove the field strip screw.

So, basically it all hinges around the fit of the field strip screw in the rear frame hole.

Q: Should you use a rail bushing?
A: Yes, it makes assembly a lot easier.

Q: Will a mag function without one?
A: Yes, it will.

Q: Would I suggest a first time mag owner ditch his rail bushing to defy "the man"?
A: No, I would not (but I still say Damn the Man!).

Q: Is saying that a mag will function without a rail bushing false?
A: No, it's not.

Q: Is saying that a mag will function without a rail bushing unethical?
A: What? No, why did you even ask that? WTF is wrong with you?

Q: Has it been a lot of fun to poke Rogue and Rabid a little bit on a stormy day in March?
A: You betcha!

Q: Will I care if I "win" or "lose" this discussion, or even get the last word?
A: Not a bit. And there is not a damned thing you can do to change that.

Bwhahahaha!

[RogueFactor]

This is awesome! Rabid makes a thinly veiled post complaining about pneuframes, Rogue pipes up just to spew some of his holier than thou BS and gets called on it by the masses. Classic!

I agree. Lets hope it doesnt get locked .

[Mongoose]

Rogue....how long is it gonna be for viper pro triggers????

i've heard a couple weeks for the last four months!!!

with rogue here PBL is missing half of their existing members