One Legged T-Rex (OLTR)

[luke]

One T-Rex available in the dealer forum!

[Chrome]

>>> OK, so right now I'm not specifically charging for the mounting tab, but if I could presale 25 OLTR's and 25 installs in the M86 and customers were willing to pay for a more complex mount (more difficult to machine) that made allowances for the hidden reg do you suppose I could fill an order? <<<

Although I think you're kind of putting the cart before the horse in this case, this is really not the thread or place to muck up (seems I do that around here sometimes. . . I don't mean to. . . Honest!) recycling the old, at this point I think to everyone worn-out discussion of market dynamics. So, I'll put the brakes on here, as I started it.

In any case, one really can't argue with free and not look the fool for it . So, as I really don't have a stake in any of this, I'll again as graciously as I can bow out.

[luke]

Although I think you're kind of putting the cart before the horse in this case

(In jest) That of course is not possible, seeing how I know the inside scoop to everything I'm doing today, tomorrow and the following week. All opinions are relative to ones own knowledge of any given subject, right or wrong as it were. LOL

[grub]

For posterity sake we need a roll call to know where the original 12 ended up, after all I heard from a good source that in 25 years these will be "highly collectible". So if you have one of the 12 post up your number and maybe a pic of your build

-grub

[scootdogss]

For those of you that are using Classic valves, are you using a regular on/off or a RT on/off.

I only had about 1200psi in my tank, dry fired a little bit and ran a few balls thru it before I ran out of air.

classic valve with regular on/off. never fired a pneumag before but i thought it ripped. I went with luke's frame and LPR. nice trigger pull. I did have to adjust trigger in so can not use safety. I have a classic twistlock body so I can use the manual powerfeed safety.

Only tank I have is old centerflag output is 800 i think. almost out of hydro so ninja shp will come soon.

I have a rt on/off i can play with as well. also have xvalve with ult. I can try all these combos, unless it rips as is might just have too much fun playing!

will report back after it's been to the field.

[luke]

The trigger pin is a non machined part that just slides into the front of the T-Rex. It's an off the shelf 1/8" x 3/4" dowel pin. You can make a custom length one that will allow you to use your safety.

[Stedspitcher]

"So whos frame?"

I believe that is mine and I can not wait to coon finger it. Lol

[luke]

Just wanted to post this for the record before I forget, zulubravo44 had the classic valve with the kickazz trigger pull. His package just went out today (per his request) perhaps he can post up the information on the valve after he tests it out. I'm curious to see what he thinks about the build.

Ailia, also had a Classic setup that was a sweeter than zulubravo44's. I really dug this marker all around.

[luke]

I believe that is mine and I can not wait to coon finger it. Lol

Yes, Stedspitcher sent in the M86.

[zulubravo44]

Just wanted to post this for the record before I forget, zulubravo44 had the classic valve with the kickazz trigger pull. His package just went out today (per his request) perhaps he can post up the information on the valve after he tests it out. I'm curious to see what he thinks about the build.

I can't wait to get home and test the thing out for myself. As a bit of a teaser, it has an RT on/off with a .750 pin.

[BLachance75]

I put a level 10 Classic valve in with a RT on/off and .750 pin

With my slow fingers I can't tell a difference speed wise and the trigger pull seems to feel the same as well.

My next test will be with an Anker trigger that I just orderer from Luke.

[luke]

That was smoother trigger pulls than the first video.

[BLachance75]

I practiced drumming my finger on the desk at work. Maybe some day I can hit 10bps.

[going_home]

So fast I didnt even see the paint.

[goin5150]

https://www.flickr.com/gp/18973255@N05/4AVRhN