Level 10 "carriers that worked" list thread

[cphilip]

Thought it might be interesting to get a composite list to see if there is a trend on the carriers to bolt fits starting to develop. Besides Tom may actualy be able to use that to cut down on the carriers normally supplied and keep the kit costs down to us. Might be mutualy benificial. So lets see...

NB: List the carriers you ended up using only the one (ones) that worked. Nothing else. Thats all we want here in this thread. Not even marker type here. Use the regular feed back thread for that.

me? I was able to use the 1.5 and the 1.0 and they both worked. (I do need to double check I am reading them right but will correct if I am wrong please do the same)

[wes]

i think it was 1 but dont fell like messing with it. When i do feel like messing with it ill edit

[mxracer33x]

1.5 worked best for me. It will be interesting to see how much it varies after another batch of o-rings are produced.

[virus]

for me i ended up with teh 1.5

but we just need to remember one day we may need to use the 3 or bigger.... heck we may need a much smaller one also.... it all depends on the batch of orings....

[Bwaites]

1.5 and I was surprised that anyone might be able to use the 3 and larger ones.

Bill

[Aussie Mike]

I used the 2 (w/ longest spring). I can't imagine the need for a size above 3 either

Mike.

[FreshmanBob]

right now i have the 1.5 with the shortest spring (vents gas w/ the middle) but i'll be breaking in the o-ring tomarrow at the field

[DarkPhoenix]

I am using the no. 2 carrier with the original bolt spring.

[oldsoldier]

Believe I am running 1.5. But 1 works also.

[Evil Bob]

Old high rise RT - Carrier 1.5, middle spring, 3 shims, 750 psi input
Newer RT - Carrier 1, middle spring, 3 shims, 750 psi input
EMag - Carrier 1.5, middle spring, 3 shims, 750 psi input

-Evil Bob

[sicones]

how d0 you know whats 1.5 and 2

[rx2]

1.5 with middle spring. 2 is too loose, and thus leaks. 1 is a little tight, but still works if the AIR is jacked up all of the way, and a lighter spring is used.

[BlackVCG]

The rings around the carrier represent a value of 1 for each one that's on the carrier. The three divots drilled in the carrier represent a value of .5. So if you have three rings and divots, then you have a 3.5 carrier.

[Russ]

I'll play along...

"2" carrier
long silver spring
2 shims

[Potatoboy]

If I assume correctly, you want the spacer that offers the minimal amount of resistance. By hand I've got the 2.0 in there now, no shims as I don't have a tank to check if the carrier is corret.

Will update when I get tank.