Level 10 "carriers that worked" list thread

[Manuel_FZR]

carrier 2 (probably change to 1.5 after break-in)
2 shims
middle spring

[Sir Chopsalot]

im out of air so it isnt quite working right yet but at the moment i have 1.5, 2 shims, and middle spring

[Brian68mag]

up she goes

[LittMag]

1.5 carrier
3 shims
med spring

[ts1spoc]

Mini-mag

I used the 1 carrier, no shims and the shortest spring. I had the 1.5 carrier and it shot better, but it had a slight hiss. With 1 carrier I did have to turn up the velocity quite a bit to get it to function, but I have not chronographed it to see where I am at.

[wimag]

#2 carrier / 2 shims / middle spring.

Went through half a case. tried everything in the book to chop. runaway mode, fanning the trigger. nothing. This upgrade is unbelievable

[Hexis]

1.5 carrier, 2 shims, shortest spring.

I'm still tweeking, and will get a longer spring to work. But I just went through a half case of 0 bounce marb without a single break.

[the jackal]

1.5 with medium spring and two shims.

[BajaBoy]

#1 car. 1 shim, med. spring about 430psi input, shootin at 277 -2+2

[Tyril]

1.5 carrier
2 shims
Medium spring

It didn't cut my finger off, woot!


-mike

[P4ULuk]

Started with Carrier 2 and 2 shims now changed to 1.5 after 7000 shots and a slight barrel leak.

Paul.

[Cyberious]

Number 2 carrier, 2 shims, smallest spring. Although I had to take a little medal off the tip of the new bolt because it was too thick. I used an extremely fine grit tip on the dremel. Once finished I polished the whole bolt with the dremel and a cotton wheel wrapped in never-dul.

[wes]

ok, rightnow i have in nubmer 1, 2 weeks ago, i had to putin .5 because of a small leak, and it stopped, but last weekend it didnt work so i had to put in 1

[Strider]

It's in!

I'm running #2 carrier with stock emag spring. (250fps) 4 shimms.

Sweet trigger, but I have an occational slight leak down the barrel. Have to try a smaller carrier...

[UPDATE!]
I've gone with the 1.5 carrier, and the leaks are gone. This setup has worked between 250 and 275. (Haven't tried it at other velocities yet...)

I did notice a slight trigger speed decrease when I went to the smaller carrier, but it was negligable...

[DiRTyBuNNy]

I've got a stock new emag...i've put the 2 carrier/ 2 shims/ and the longest spring following Miscue's video..so i'll be trying her out at the field this weekend to see how it holds true..i imagine i may have to move down to a smaller carrier..but oh well..