Quick disconnects and Tom's Chord ULE?

[GT]

I was watching one of the mega meet vids, Thanks Adam, and I noticed more than a few AO members with some very clean setups. I really like how Tom's Chord sends the air line back towards him and then down to his tank. I was wondering if anyone had any pics of the gun.

I also want to run a quick disconnect right off the valve, I will be running X, which one would you guys suggest? Keep in mind I want something small and light.

jb

[chizle97]

I dont get what you mean by that. Do you mean the way he routes his gas line or somethin. I think it was just putting the macro on backwards

instead of


valve
x x x
......x
........x
.........x
.........x
........asa
Its
valve
x
x
.x
..x
....x
......x
........x x x ASA

[rehme]

i just run my hose to my forgrip and then to my valve.

if you have LX you might want to put your qwick disconnect by your asa so you can get a better grip on it when you have the air in you hose.

[GT]

he runs it back towards him and then crosses the back of the mag and down to the leftside of the flatline(left side if you are holding it)

[Muzikman]

He runs it the same way all the old mags were. It has just been the last few years that people have been keep the hose on one side of the gun and running it forward.

here is the best pic I have of it. http://pittsburgh-music.com/paintbal...s/IMG_0692.jpg

[who_311]

Isn't it just the macro line fitting turned around? I am not a genious or anything, but that is what it looks like to me.

[WARPED1]

Originally posted by who_311
Isn't it just the macro line fitting turned around? I am not a genious or anything, but that is what it looks like to me.

Yes.

[who_311]

Do i get a prize?

[WARPED1]

Originally posted by who_311
Do i get a prize?

Yes.
A big, fat, juicy NOTHING! Marvel at its beauty!

[who_311]

You might knock it, but i am quite partial to nothing, and trust me that is NICE lookin nothing.

[Muzikman]

It's not Macro Line...it's Steelbraid...

[Gadget]

I run my mag a similar way - but as a lefty I can keep the hose on the right hand side rather than having to cross over to the left of the reg.

[Tunaman]

Go Proconnect!

Lots of ways to do it...I have always liked using the Proconnect too...

[jaylock33]

my version

This is a steel braid with a 32 degrees slide check/disconnect. Don't know if this helps any.

[Top Secret]

Similar to Tunamans. I definatly find this to be the best setup.