Important Announcement on the ULE Trigger

[Cryer]

Originally posted by sneakyhacker420
...now theres some competition wether i should use my imp or use my mag...

There wasn't before?

[Dayspring]

See, here's the deal. Up until a certain point, emag on/off valves had only ONE oring on it. (You can also tell b/c you have an aluminum & brass on/off). Then, they changed the design to have 2 orings and an all brass on/off. In order for that to work, they needed to mill out a bit of the valve assembly to fit.

Check your on/off valves and see what you have before yelling @ Tom.

[azzkikr]

once again that rules out the original RTs. wich in part absolutely SUCKS for me, considering i have a old school RT and a classic valve.

well its preaty clear now that the mod is probably a new on/off assymbly. there for hard to make it compatible with all the existing markers since the sort of all have slightly different on/off dimensions. either way I'm screwed.

there has got to be a way to make it work with the currently non compatible on/offs. where there is a will there is a way.

in the most of exteem of cases, couldn't the non compatible RT valves be drilled to accept this mod?

later AZZKIKR

[FooTemps]

Originally posted by Kevmaster


yes...save money...dont spend it.

It doesn't matter if I save or not... I have a restriction set on me that I can only spend 100 dollars per Item on paintball. So that means even if I have enough money, I wouldn't be allowed to buy a new valve. If there was a financing option... I could cheat around that by paying like 50 a month or something.

[AlabamaMan]

Would it be possiable...

I was wondering if people could send their SS retro valves into AGD to be drilled for a double O-ring at the bottom of the on/off.

[Cryer]

FooTemps: Just secretly buy a retro valve and when your parents ask, say you spent $100 for the back of the valve, and $100 for the front.

Or you could offer something in a trade to bring the total price of a retro down to $100...

There are ways around everything...

[sneakyhacker420]

Originally posted by Cryer


There wasn't before?

imp trigger is feather light and has a 1/2mm pull... and its green and stuff

mag is pretty good too... buy my imp is in the shop getting some 'noid work done... so currently, there is no competition

[thecavemankevin]

when can we get a pic of it?

[BajaBoy]

wait so if we have 2 orings in the on/off it will work? These are the orings that u see when u look into the on/off hole in the body when the brass peice is out?

my emag valve have a big tan one then the quad inside that.. (1month old)

and my pretty new retro (about 1/2 old) has only one greenish looking oring.

so i take it i Cant get this mod for my rt?

[tony3]

errrr, man for once I thought a new mod that is coming out MIGHT actually work for the old school RT's, and of course they don't, It's settled I'm going to get an eblade cocker

EDIT: Also, I think more people complain about the heavy pulls on classics because it doesn't get kicked back as hard, I think a lighter trigger mod would be more benifcial to a classic mag owner, then an rt owner

[TheJester]

ok, the tenitive release date is the amature open.....when's the amature open?

[Bob01RT]

My retro valve only has the one oring so it won't work, but guys you gotta realise if there was something that could be done TK will probably do it or try to find a way to do it, I'm sure he doesn't like telling people it won't work with certain valves.

[BlackVCG]

Originally posted by TheJester
ok, the tenitive release date is the amature open.....when's the amature open?

July 16th to the 20th

[Cryer]

Originally posted by BlackVCG


July 16th to the 20th

Oooh sweet. I get paid the Friday before that.

[jdev]

1) good think i picked myself up an xvalve at the megameet

2) when i saw this post, I was looking forard to hearing when the actual release of the ULE to the stores would have been.