Possible Resolution to the 3.2 Problem.

[cphilip]

Ok I just finished this one here... This one was really pretty easy to get to go FA once you knew exactly the right spot on the trigger pull. Once you knew it you could do it most every time.

But!

I just switched the wires and now, no matter how hard I try, I get only one click per pull. No can make it muliple shoot at all now.

Amazing really.

It works.

This is a X Mag with 3.2

[hitech]

Originally posted by cphilip
This one was really pretty easy to get to go FA once you knew exactly the right spot on the trigger pull.

That is how mine is. With any setting on the shot buffer. The trigger adjustment and the BPS limit seem to effect it also. haven't fixed it yet, but I sure it will work.

[DiRTyBuNNy]

Originally posted by hitech


That is how mine is. With any setting on the shot buffer. The trigger adjustment and the BPS limit seem to effect it also. haven't fixed it yet, but I sure it will work.

Ditto...at least it was..oh well..who knows now..

[cphilip]

Originally posted by hitech


That is how mine is. With any setting on the shot buffer. The trigger adjustment and the BPS limit seem to effect it also. haven't fixed it yet, but I sure it will work.

Its gonna be kind of the luck of the draw if you have it or not. All or nothing. Those of you that have 3.2 and are not seeing any of this, then you got lucky and the wires just happened to be correctly placed. Those that are having problems gotta switch em. No real way to know until you got 3.2 on there! Unless when Tom gets back he can figure out a way to measure which polarity it likes BEFORE install and then install them all that way. But for now its a crap shoot. Some will... some won't.

[SlartyBartFast]

One of those problems whose solution is painfully obvious. Once you've found a solution.

Large magnetic device next to a switch activated by magnetism. Who'd have guessed that was a problem?

[cphilip]

Well you forget the new software that made it more sensitive had to be thrown in to the eqation. That complicates it considerably... That switch and that magnetic device have always been right there...

[1stdeadeye]

*knocks on wood*

My X-Mag is perfect with 3.2. It does have an appetite for ball detents though!

[cphilip]

Good discussion starting on this in Deep Blue. While I can see the results of the change and its obvious. It does work and I am convinced now of that... I still not certian we can explain yet WHY it shows with 3.2 more than before with any other emag set up. Go check it out. Black started it...

[FutureMagOwner]

i think its like i believe either miscue or black said is that the trigger doesnt check on the older versions fast enough for any solinoid interference to register.



my question is if you dont have this problem (like i dont) and you switched them would you get it? just some random pondering. me likes this new version alot as is no need for me to personally test (especially seeing as how i dont have a soldering iron let alone solder...)

[jtoothman25]

My Emag is fixed, and doesnt go FA any longer. Switching those wires did it..

[cphilip]

Originally posted by FutureMagOwner
my question is if you dont have this problem (like i dont) and you switched them would you get it? just some random pondering. me likes this new version alot as is no need for me to personally test (especially seeing as how i dont have a soldering iron let alone solder...)

I would almost bet money on it. If you just happened to get the right wires in the right place to start with then you would not have the problem and if you switch them you would. Thats what we seeing but obviously we not going to tell you to break something thats not broken. Its the luck of the draw if you got em right. They both white wires. And until now no one cared about polarity and the Selenoid will energize ether way you hooked em up. Now we care!

[cphilip]

Please report software version your switching wires on. Most of you are 3.2 but someone out there is going to do one that is having muliple fire on a previous software version and we want to know if its this or is something else on those. If it does not work for you thats even MORE important to know. Other issues can cause this or similar thing. We need to weed those out.

[jtoothman25]

Well.. i guess I have 3.2 software....

[cphilip]

It should say as you boot up first time. Software version should display then. For a minute.

[jtoothman25]

When i boot mine up, it just says "PORNSTAR"