Agg Mag (mQ-Valve)

[PBX Ronin 23]

Our algorithm is on par the Pred 2 based on what we've been told. We have not done a side-by-side analysis yet but we would like to down the road.

[JoshK]

what about that price elstimate i asked for?

["Joe"]

Ya, it'd be nice to have an amount to be shooting for. I might need to adjust my saving tactics.
From the looks of it, you'll have a kit and a full marker. Is this correct?

[Dayspring]

Most likely, it will be a kit and a full marker.

No, we do not have ANY sort of price estimate yet. Give us some time.

And the only reason we used the Eblade frame was that was what we had in the shop at the time that can run the mQvalve. Our proto frame was elsewhere.

Vert frame- we don't make one, so we wouldn't know. The cocker and mag share the same bolt pattern for their mounting holes, so we can easily use our frame & custom board for this gun.

Hyperframe- Centerflag has stopped production.

[PBX Ronin 23]

We aren't adverse to doing some kind of vert frame for this project. We're also taking a lookin at the possibility of retro-fitting the IntelliFrame. There are lots of possibilities. We're hoping to iron-out these issues soon.

[NJPaint]

Hmmm, I just picked up a Turtle Cocker E-blade, I think its going to make a stop at PBX this winter break for some minor upgrades

[spasticsquirrel]

if i got a rouge frame, would i be able to get this to work with that frame, or could you?

Just dont want to get the wrong upgrade first...

[PBX Ronin 23]

if i got a rouge frame, would i be able to get this to work with that frame, or could you?

Just dont want to get the wrong upgrade first...

The problem is........"how are we gonna mount the board and the trigger switch in it. I'll have to speak to Rogue and see what can be done.

[Chronobreak]

if you guys can mount it into an intelliframe or y-grip without probs then it should be fine.

otherwise you might need to use a desighn more like ga devil does..or something completely different.

[spasticsquirrel]

i do beleive that the devilmag uses rouge's frome, im not sure though.

[Chronobreak]

i do beleive that the devilmag uses rouge's frome, im not sure though.

he does but its milled a bit more and stuff isndie to have room for the internals

[PBX Ronin 23]

Unless Rogue is willing to pre-mill the frame to accept our board, this may be difficult.

[spasticsquirrel]

My school is getting a cnc machine next year, maybe if i knew what to mill, i could mill it myself so that the internals would fit.

But... i dont know what kind of cnc machine, and it might not be able to mill it out.

so right now, im at a

[shatter_storm]

I just searched the thread, I got the impression that the sear and all that related linkage isn't necessary with the mQ-Valve the way you have it set up right now. Would this mean you can run the thing independant of a gripframe and have the control electronics mounted whichever way is most convienant?

[PBX Ronin 23]

I just searched the thread, I got the impression that the sear and all that related linkage isn't necessary with the mQ-Valve the way you have it set up right now. Would this mean you can run the thing independant of a gripframe and have the control electronics mounted whichever way is most convienant?

Absolutely.

One of the ideas I had was to implement it on a non-paintball project involving an r/c scale model of a tank that will use the valve to fire munitions from the canon. Works well in the conceived application.....at least on paper. Hopefully I'll find the time to actually do it.

This is the reason why the mQ-Valve will be more tolerant of poor tolerances between the body and the rail since you don't have to worry about the linkages between the sear/bolt/on-off/trigger.

This but one of the numerous advantages of the mQ.