Agg Mag (mQ-Valve)

[PBX Ronin 23]

Platforming the mQ to be used in a Mag body requires that we put the valve into a casing to fit to AGD specs. People might get a little confused when they see the actual size of the Cocker version.

The difference is that in the Mag version, the out-port is facing forward through a power-tube like assembly.

And yes, the valve casing can be milled and annoed and the only limitation is your imagination.

[nicad]

Mel-
what an email addy I can contact you at? if you dont want to post it in public, email me at the email from the contact page here http://www.deadlywind.com/contact.html

thanks-
Colin

[PBX Ronin 23]

Nicad Body + Rogue Rail and Frame + PBX mQ = BEAST.........

[Mad_Man]

Any idea of a timeframe until the valve can be released in a mag casing?
Even a very rough scale in months would do, I just want to know if i should hold my breath.

Is the original price estimate of less than $150 still on?

[PBX Ronin 23]

We're working towards having them out before the end of the second quarter..........I hope. As for the price, I'm not sure about that. We may have to sell the valve as a kit with a frame and pds.

[slade]

Nicad Body + Rogue Rail and Frame + PBX mQ = BEAST.........

how bout karta/dallara body and rail, rogue vert frame, and PBX mQ valve milled to match the body?

[rkjunior303]

Platforming the mQ to be used in a Mag body requires that we put the valve into a casing to fit to AGD specs. People might get a little confused when they see the actual size of the Cocker version.

The difference is that in the Mag version, the out-port is facing forward through a power-tube like assembly.

And yes, the valve casing can be milled and annoed and the only limitation is your imagination.

why not mill a slug/custom body that already accepts the new valve assembly in its smallest form rather than fitting it to an existing mag valve hole..

for example.. colin does a run of Kartas.. Instead of the milling doing the standard mag valve, these special bodies are mQ valve bodies........ Just a thought. Might be easier just having the mag valve version, since there would prob need to be one for something like a ULE anyways....

[Skoad]

retrofitting it into an exisiting mag body will produce more sales. (at least at first)


Also, the slug bodies have the hole for the valve/bolt area drilled already.

[PBX Ronin 23]

how bout karta/dallara body and rail, rogue vert frame, and PBX mQ valve milled to match the body?

We can certainly do that. I have spoken to some people about doing that already. It would be pretty sexy if all the lines flowed from front to back.

why not mill a slug/custom body that already accepts the new valve assembly in its smallest form rather than fitting it to an existing mag valve hole..

for example.. colin does a run of Kartas.. Instead of the milling doing the standard mag valve, these special bodies are mQ valve bodies........ Just a thought. Might be easier just having the mag valve version, since there would prob need to be one for something like a ULE anyways....

We're already thinking of doing this. There's quite a bit of stuff up our collective sleeves in PBX. You'll remember this thread several months from now and laugh. But we also need to provide for the existing Mags out there as well.

[spasticsquirrel]

What is going to be put into the grip frame?

[PBX Ronin 23]

What is going to be put into the grip frame?

We're trying to ascertain this now. What we would ideally want is to be able to fit the board onto the Intelli or other readily available frame and just sell the valve, eyes and the board. This in and of itself seems to be major design obstacle but we're trying to see what we can do.

[Skoad]

Is PBX hiring?

[PBX Ronin 23]

Or worse case scenario, sell the a modified version of our e-frame.

[spasticsquirrel]

I heard my logic frame that im going to get, dont have it yet thanks to the ano guy, has plenty of room, could you just tell me how much space i need, and i could probably try to modify the inside of it if i need to.

[PBX Ronin 23]

I heard my logic frame that im going to get, dont have it yet thanks to the ano guy, has plenty of room, could you just tell me how much space i need, and i could probably try to modify the inside of it if i need to.

I hear what you're saying but it doesn't make sense for us to come up with several board configurations. Space is not the issue.