Special Mod For Xmags/emags

[M.Don]

this one guy I know is making a produceable mod to remove the X/E-Mag batt packs, anything in particular you guys want?

ie
better eyes
number of shot per charge/battery
etc etc

[rkjunior303]

not possible, unless they ditch the big noid.

[RapidTransit]

A ULT, a little tweaking to the noid, and replacing the like 15 AA sized cells in the battery pack with 1 or 2 nine volts and a huge capaciter, it could probably happen.

[BigEvil]

..and if they ditch the noid, either it needs the ult, or its going electro-pnuematic. So either way you r going to have to find a spot for the battery anyhow, or, mount a lpr.

I dont see any benafit going to 2 9vs. Why, because they are disposable?

I dont see the issue with the emag battery. If someone says that they want to increase the cycle speed of the gun by replacing the noid, then I can see that.

If your saying you want to eliminate the big battery becouse its heavy, then I will point you in the direction of some good personal trainers and you can get to work on your chior-boy noodle arms.

But no one mentions the most obvious way to reduce the emags weight... go remote. Or is that too un-agg?

But anyhow... I dont see the need to go messing with the emag right now. There is new improved software already out, and new boards, well, someday. If your looking to build a hot-rod, the best way would probably be something like what Coolhand is doing.

[11 Bravo]

I dont mind it so much but it would be cool to lose the weight of the batteries. I wouldnt want to replace the noid or anything like that though.

[M.Don]

ok theres no ult and no pneumatics and no silly battery arangments. i cant say more than that. i dont think the weight is a massive issue, however the general consensus on paintball markers it lighter is better, thats why we all use aluminium now, so i think it will help make the emag/xmag more compatative/desirable. which can only be a good thing.

[Muzikman]

This has been discussed, looked into and tried many times over the past 5 or so years. There is a reason the noid is as big as it is and there is a reason the battery is as big as it is.

[M.Don]

ok this has nothing to do with me, but i do know its genuine, and from some very well respected people, so i know its going to be good. i was looking for constructive idea thoughts and comments not speculation and naysaying.

[RapidTransit]

ok theres no ult and no pneumatics and no silly battery arangments. i cant say more than that. i dont think the weight is a massive issue, however the general consensus on paintball markers it lighter is better, thats why we all use aluminium now, so i think it will help make the emag/xmag more compatative/desirable. which can only be a good thing.

A 50ft extension cord?

[11 Bravo]

Yeh quit saying it cant be done. Nothing would get done on anything with attitudes like that.
The Xmag would not have existed in the first place if people involved had that mindset.

If Ford had your attitude we would still be riding horses on coblestone streets.

M. Don I dont have any ideas, but I wish those guys luck.

[rkjunior303]

Don't you think in the 5 years the e/x-mag has been out, IF it could be done it would have?

it would require a complete redesign of the marker.

[11 Bravo]

Um no! Seeing as how they dont make the X anymore and they are just selling off the remainder of the Emags. AGD has had no desire to tinker with anything.

How would you know it cant be done. Have you tried it?


I also saw post after post about how the software for the mags was as good as it could get and that the board couldnt take anymore. Remarks like -Dont you think that AGD would have done it if it needed to be done. 3.2

Well its been done. And not by AGD.

[PsychoBaller]

Calm down all...

The one day I come back in a long time to check out AO, the more and more its turning into PBN.....


ehh...

[Blurry]

Um no! Seeing as how they dont make the X anymore and they are just selling off the remainder of the Emags. AGD has had no desire to tinker with anything.

How would you know it cant be done. Have you tried it?


I also saw post after post about how the software for the mags was as good as it could get and that the board couldnt take anymore. Remarks like -Dont you think that AGD would have done it if it needed to be done. 3.2

Well its been done. And not by AGD.

Whats the voltage/current out puts on the battery back and then someone could figure it out by capacitance and a few other calculations. But what are the voltages and some of the specs of the battery pack. Average shots per full charge and so forth.

Thanks
Blurry

[neppo1345]

yeah...it's called repositioning the battey pack on a specially made tank cover...

Anything else would require a custom noid/sear assembly like the race gun frames use...and would probably require replacing of the entire grip frame...

It's possible...but I don't see it being:
A. Cheap
B. Worth It
C. Marketable (Except for on AO)