My new minimag is a great gun, but it is sucking up a ton of air! I have adjusted the reg. and everything! what should I do to make it not suck up as much air? does anyone have a similar problem, ids thier a solution?
Lack Of Air?
Collapse
X
-
Tags: None
-
For one take off the reg it is not needed.Originally posted by don miguelMy new minimag is a great gun, but it is sucking up a ton of air! I have adjusted the reg. and everything! what should I do to make it not suck up as much air?"The Few Who Do Are The Envy Of The Many Who Only Stand And Watch"

Alway Remember *343*
Si vis pacem, para bellum -
with or with out paint? you will shoot off a lot more air dry firing it than if u run paint through it.
u can put a softer bolt spring in and then take down the velecioty adjuster to get it back to a low enough fps but it might be harder on the paint.
-mattComment
-
[QUOTE=fire1811]For one take off the reg it is not needed.[/QUOTE
my mistake I don't have a reg I mean the stock 68/ minimag valve.Comment
-
im not dry firing it, i am talking about with paint, do you have any duggestions, besides buying an x valve. does this happen with your mag?Originally posted by SR_mattwith or with out paint? you will shoot off a lot more air dry firing it than if u run paint through it.
u can put a softer bolt spring in and then take down the velecioty adjuster to get it back to a low enough fps but it might be harder on the paint.
-mattComment
-
[QUOTE=don miguel]Gottcha.Originally posted by fire1811For one take off the reg it is not needed.[/QUOTE
my mistake I don't have a reg I mean the stock 68/ minimag valve.
How many shots you getting and what size tank?"The Few Who Do Are The Envy Of The Many Who Only Stand And Watch"

Alway Remember *343*
Si vis pacem, para bellumComment
-
does your mag suck air too? can the x valve fix that?Originally posted by behemothMags are gas hogs. and dont shoot really deep into a tank either.
Live with it.Comment
-
what does a lvl 7 do, is it cheaper and easier too install than a lvl 10.Originally posted by behemothusing level 7 will help.
And double as a blender...Comment
-
zackzel
Level 7 was bolt used for the past 10 years before the level 10. Its simple to install and will never need adjusted, but it will chop. It is slighly more efficent then the level 10 but not enough for you even really to notice.Originally posted by don miguelwhat does a lvl 7 do, is it cheaper and easier too install than a lvl 10.Comment
-
I get a good two hoppers (180 rounds each) and about a pod and a half (150 round) so an estamate of a total of 500 shots out of a PURE ENERGY 48 cu 3000psi tank. when the manual says 700 shots out of a 9 oz. WHAT IS WRONG! is that normal?Originally posted by fire1811Again
How many shots are you getting and what is your tank size.Comment
Comment