G-Force to release pneumatic frames for the Mags

[Andrew Cunje]

Andrew or WK2...get the manual or tracking numbers today as promised?

my tracking number will come through on friday/monday

ill let you know

so you ALL can track it! lol

[warbeak2099]

Yea I'll post up the tracking number too lol. We can have a race

[jade_monkey07]

I wonder what size the hole is for the spring, iv got a few rare earth magnets laying around that look about that size. The magnets are .125 inch or 3.2 mm

[TnDeathInc]

manual - nice pics - nice, until its in my hand and darn well should be first after ordering on the second day, not happy. Im with the other im not sure even 100 people ordered at this point with 10 people realling in this thread.

but another promise of delivery is well, another promise

[TwilightG]

I wonder what size the hole is for the spring, iv got a few rare earth magnets laying around that look about that size. The magnets are .125 inch or 3.2 mm

I was thinking the same thing (except that I don't have any magnets lying around ) It also depends on where the spring sits inside the frame.

Since this is somewhat related to the trigger, how difficult would it be to have the trigger anno'ed? I know that all of the stops and set screws would need to be removed before anno but would removing the roller bearing cause problems for me?

[warbeak2099]

I was thinking the same thing (except that I don't have any magnets lying around ) It also depends on where the spring sits inside the frame.

Since this is somewhat related to the trigger, how difficult would it be to have the trigger anno'ed? I know that all of the stops and set screws would need to be removed before anno but would removing the roller bearing cause problems for me?

Ooh yea good question.

[matteusz]

Ooh yea good question.

The question I have is did he make any extras? oooh and will these be going into production for other markers or have they officially decided it isn't worth it?

[TwilightG]

The question I have is did he make any extras? oooh and will these be going into production for other markers or have they officially decided it isn't worth it?

Not likely...

There was a second run planned before the minimum 1st run orders were placed. Once the frames were already delayed by 1-2 months, G-Force announced no 2nd run.

If you are interested in purchasing one, you have two options:
1) Hope that someone would be willing to sell their preorder to you (G-Force isn't issuing refunds)
or
2) Wait and see if any popup in the B/S/T forum once we start receiving them. A few customers are very disgruntled and may choose to just sell it outright once they arrive.

[matteusz]

Not likely...

There was a second run planned before the minimum 1st run orders were placed. Once the frames were already delayed by 1-2 months, G-Force announced no 2nd run.

If you are interested in purchasing one, you have two options:
1) Hope that someone would be willing to sell their preorder to you (G-Force isn't issuing refunds)
or
2) Wait and see if any popup in the B/S/T forum once we start receiving them. A few customers are very disgruntled and may choose to just sell it outright once they arrive.

I can only imagine. I am just glad I haven't had money tied up in this the whole time. All the same now that they look to be shipping I am thinking maybe they are worth it. Anyone that wants to sell their spot let me know please.

Of course if you want to wait and then let me know once you have it I can watch the b/s/t too. Should be interesting to see how these shoot.

[Twistedpsyche]

Well I've been away and out of the loop for a few days..
I just brought myself up to speed and I have a couple things to say.
#1. I'm ticked that the LPR is coming seperate. I paid for a completed bolt on frame and I expect such.

#2. How many more months are we going to have to wait for the LPR?

#3. Don't start calling people with valid concerns and complaints "childish". I'm a very busy man, I don't have time to call every week for a status update. If Garf were smart he would just post a weekly update. Much more efficient on his end, doesn't need to get interrupted 20 times a week with phone calls.

That's my 2 cents. I could go on longer, but like I said, I'm busy.

[warbeak2099]

Garf sent me these specs on the production frames:


Frame Cosmetics
-new trigger guard milling
-trigger guard cut higher for big hands
-grip area reduced for smaller hands
-new custom grip panels (3 screws) with inner pockets milled to accommodate wide aftermarket LPR

Functional milling and improvements
-mill excess material for weight reduction
-increased LPR cavity area for larger LPR
-re-designed actuator with exhaust vent holes for faster cycling
-set screw for retaining trigger pin
-dual ball bearings in trigger
-changed to M3 from 4-40 set screws for finer adjustments
-spring pocket in trigger
-new trigger geometry
-access hole for sear release
-wider sear extender adaptor
-back stop for sear extender adaptor

I'll update you on new info as I get it. I'm on vacation so any update will probably come on Thursday when I get back.

[Smoothice]

the only update I want to hear about is your tracking number.

Which we better not be waiting till Thursday to hear.

[warbeak2099]

the only update I want to hear about is your tracking number.

Which we better not be waiting till Thursday to hear.

If I can't get to a computer before Thursday that's just what will happen. I'm on vacation and it's not my responsibility or job to get you any information. I'll try to do so before then, but if I can't then "oh well".

[Smoothice]

If I can't get to a computer before Thursday that's just what will happen. I'm on vacation and it's not my responsibility or job to get you any information. I'll try to do so before then, but if I can't then "oh well".

It became your job when you became Garfs fan boy.

Maybe Garf will post the tracking number since you said you would make it public.

That is IF he intends on shipping.

[warbeak2099]

It became your job when you became Garfs fan boy.

Maybe Garf will post the tracking number since you said you would make it public.

That is IF he intends on shipping.

I volunteered to relay information for him. I'm not getting paid or anything. If you want a tracking number, ask Andrew Cunje. He should be getting his the same time I do. No one owes anything to you except for Garf. Especially if you're going to be a dick to me about it.

And I will not make the number public. I will PM it to people who have ordered frames.