Introducing the Micromag 2009

[Dend78]

2 things...
(Flame away if I missed this already somewhere)

1. What's to stop me from using the emicro body w/ a mech setup?

2. Has there been any discussion on "Factory" ULE milling?

Like this micro:

where the heck have you been lol

nothing is going to stop you at all, they are made to work either way only difference is you wont have the radius at the front of the (rail) on the bottom side.

ULE milling i believe would be after the fact but if you talk to PTP they may be able to help ya out, also i dont know that much more could come off the front of the body/rail portion

[Dirty Deuce]

Any progress on the possible "special anno" yet? I'm thinking I'm gonna try to pick up a second body now.

[dr_g_2006]

put donw dr_g_2006 for one of the green acid washed bodies

[Tracy_ptp]

I want to get through the pre-orders first since it will take 4 to 6 weeks to complete. As soon as the pre-order is done we will work on the ano!!

[Tracy_ptp]

I am working on getting the images for the vert ASA and Vert Gadget grip. At this time the gadget grip will not be a gas thru.

[Dirty Deuce]

I want to get through the pre-orders first since it will take 4 to 6 weeks to complete. As soon as the pre-order is done we will work on the ano!!

Cool, thanks Tracy. Just got your email as well I'll try to send the info during lunch.

[luke]

As for anodizing, we will offer dust/satin black, raw (which will need to come back to us for assembly)

Tracy_PTP, I'm looking to pick up a body just as a collector at this point in time. I'm not looking for Pro Team to assemble a marker for me, is that a problem?

[Tracy_ptp]

Tracy_PTP, I'm looking to pick up a body just as a collector at this point in time. I'm not looking for Pro Team to assemble a marker for me, is that a problem?

It doesn't look like we will have anything that will be too difficult to assemble. So I don't think it will be a problem.

Everyone needs to keep in mind if they do after-market milling the liability lies in your own hands and not ours.

[pk5]

I have a few question regarding the tolerance of this body:

1. Since i am getting custom milling, is it true that you cannot get the body anodized gloss due to the tolerance?
2. If the polished is only on the outside upper surface will that be ok?
3. Is there anything else that i should take consideration when getting milling and anodizing done?

Thanks

Anyone know the answer? I have been following this thread, but the reply never seem to give a clear answer on the absolute tolerance of the body?

Thanks

[Tracy_ptp]

Anyone know the answer? I have been following this thread, but the reply never seem to give a clear answer on the absolute tolerance of the body?

Thanks

Sorry I was supposed to answer that. You can get gloss. You can polish it. Just like anything else, just have to be careful they do not take too much material off.

We will be doing Gloss Black!

[Old School 626]

Love the design. Three questions:

1) If the front block holds the breach, how is it help on? Where I am going is will the breach be easily removable/changeable ala the X mag.

2) How about a 15 degree ASA?

3) if we want a raw body will the price remain the same and an annodized one?

[Dend78]

Love the design. Three questions:

1) If the front block holds the breach, how is it help on? Where I am going is will the breach be easily removable/changeable ala the X mag.

2) How about a 15 degree ASA?

3) if we want a raw body will the price remain the same and an annodized one?

ill take a crack at those Tracy, Forest and Zoom will have to answer for sure but i think im right


1) the front block is where the star piece fits into so in order to rotate the breech you will have to remove the front block and turn the breech to desired location from there.

2) i believe a special one will have to be made for this design

3) as far as i know its a straight cost anno or no anno

[Tracy_ptp]

ill take a crack at those Tracy, Forest and Zoom will have to answer for sure but i think im right


1) the front block is where the star piece fits into so in order to rotate the breech you will have to remove the front block and turn the breech to desired location from there.

2) i believe a special one will have to be made for this design

3) as far as i know its a straight cost anno or no anno

Correctomundo!!!

[Engus]

tracy, I just emailed my shipping info. Another Big Thanks to everyone at PTP, and I'm looking forward to seeing the new micro in person soon!

[Dend78]

tracy, I just emailed my shipping info. Another Big Thanks to everyone at PTP, and I'm looking forward to seeing the new micro in person soon!

Tracy and I have been talkin and you get the free broken one


:rofl: :rofl: :rofl:

jk man congrats again