Introducing the Micromag 2009

[SpyderBoy]

Thanks for updating the order spreadsheet again Tracy! My order is 100% correct but it still shows me owing $205. I sent the $205 by PayPal on May 15th. Have a great day and here's to all of our excitement for a machine opening up!

[LK-13]

I have a top and middle left. Cost $50.

drat! you sunk my battle ship!

[SpyderBoy]

Detent Question. (and further ramblings)

I did a search of this thread and did not see a clear answer regarding the detents. I know there are 2 detents included with the body, but what kind are they? I thought I read that they were Cocker threaded, but are they Kila or some other brand? It isn't a deal-breaker for me, but I would like to know.

On that topic... It would be so awesome if someone with all the answers would make up a detailed spec sheet with all this technical info on it! Kinda like:

~~~JUST AN EXAMPLE. DO NOT THINK THIS IS 100% ACCURATE!!~~~
2009 PTP MicroMag specs: (available in Micro or EMicro configurations)
Includes: 1 limited edition body, breech, front and vertical ASA. All parts are available raw,
polished, or annoed. Annodizing colors are Dust Black, Gloss Black, and Gunmetal Grey.

Each 2009 Micromag comes with:
1 x ???? threaded feedneck
2 x ???? threaded detents

Options:
- additional breeches/fronts available at additional expense (see pricing on first page)
- custom gadget grip (screws into ASA)
- etc. etc.
~~~THE PREVIOUS WAS JUST AN EXAMPLE~~~

Of course this should be cleared and confirmed with PTP before anyone lists such a document. It would be a great help to me as I plan and scheme how I will finish this mag project.

SpyderBoy out.

[going_home]

Out of 104 spots only 21 marked "paid in full" ?
And one marked "is lucky" .

Lets get busy people and pony up the green.

[zondo]

I did a search of this thread and did not see a clear answer regarding the detents. I know there are 2 detents included with the body, but what kind are they? I thought I read that they were Cocker threaded, but are they Kila or some other brand? It isn't a deal-breaker for me, but I would like to know.

On that topic... It would be so awesome if someone with all the answers would make up a detailed spec sheet with all this technical info on it! Kinda like:

~~~JUST AN EXAMPLE. DO NOT THINK THIS IS 100% ACCURATE!!~~~
2009 PTP MicroMag specs: (available in Micro or EMicro configurations)
Includes: 1 limited edition body, breech, front and vertical ASA. All parts are available raw,
polished, or annoed. Annodizing colors are Dust Black, Gloss Black, and Gunmetal Grey.

Each 2009 Micromag comes with:
1 x ???? threaded feedneck
2 x ???? threaded detents

Options:
- additional breeches/fronts available at additional expense (see pricing on first page)
- custom gadget grip (screws into ASA)
- etc. etc.
~~~THE PREVIOUS WAS JUST AN EXAMPLE~~~

Of course this should be cleared and confirmed with PTP before anyone lists such a document. It would be a great help to me as I plan and scheme how I will finish this mag project.

SpyderBoy out.

You can check this out for most of your questions.

Vert ASA is not included in the original $220 price.

[Tracy_ptp]

The guys have done a great job at putting all the facts together. I try and add things to the first post as much as I can. The detents will be the cocker/angel style. From the first post till now there have been many changes so it gets confusing. Anyone wanting total clarification can call me or send me their number and I will call them. PLEASE...keep in mind this weekend I am going to Tunaball and when I get back I have to go to California. I will try and check my email at least once a day and stay in touch.

[Drix]

Any chances we can get an update on the status? Last we heard we were behind 500 beastily grenade launchers. Are we slated to begin within the week, 2 weeks, etc? Normally it wouldn't matter but I have a bunch of stuff I need to get before this comes in so I can get it all together and shipped off to anno as soon as possible after it comes in, (biggest problem is scheduling some anno time and settling on pricing/design)

[Tracy_ptp]

Any chances we can get an update on the status? Last we heard we were behind 500 beastily grenade launchers. Are we slated to begin within the week, 2 weeks, etc? Normally it wouldn't matter but I have a bunch of stuff I need to get before this comes in so I can get it all together and shipped off to anno as soon as possible after it comes in, (biggest problem is scheduling some anno time and settling on pricing/design)

There was talk that they were going to start cutting the material. And when they do, Russell will post a pic for you guys. Once they actually get on the machines it is about a 2 week run time for all the parts. Then polish and ano or beadblast and ano.

[C_losjoker]

The guys have done a great job at putting all the facts together. I try and add things to the first post as much as I can. The detents will be the cocker/angel style. From the first post till now there have been many changes so it gets confusing. Anyone wanting total clarification can call me or send me their number and I will call them. PLEASE...keep in mind this weekend I am going to Tunaball and when I get back I have to go to California. I will try and check my email at least once a day and stay in touch.

uh what tracy coming to California, what did we do to deserve this honor? What area are you going to be in, if it's in San Jose and you are not to tired from Tunaball, let's fling some paint around.

[Tracy_ptp]

uh what tracy coming to California, what did we do to deserve this honor? What area are you going to be in, if it's in San Jose and you are not to tired from Tunaball, let's fling some paint around.

I will be in Orange County, San Diego and 29 Palms (the desert) I am visiting a bunch of my old high school buddies and my family. Then I will be driving back to Maine helping my sister and husband move back to NY state. It should be a fun and tiring trip.

[zondo]

I will be in Orange County, San Diego and 29 Palms (the desert) I am visiting a bunch of my old high school buddies and my family. Then I will be driving back to Maine helping my sister and husband move back to NY state. It should be a fun and tiring trip.

hmmm... I wonder if we could bump up the AO SOCAL date for you?

Nah, you're going to be really busy without fitting in a couple of hours of paintball.

Have fun!

[going_home]

This is what 125 MicroMag09 bodies and parts look like before machining ,, hehe



I have 500 grenade launchers on the machines right now but as soon as those are done , this material gets cut up and we start making MicroMags !

Sorry about the delay but the guys fighting in the desert come before the guys fighting on the paintball field , im sure you can understand .

I should be cutting bodies in 2-3 weeks

We are anxiously awaiting more exciting pics from the Zoomster !

[The_Joker]

Vert ASA Double Tapped $5

Tracy,

I have decided that I want my Vert ASA double drill & tapped and will be PayPal'ing you the additional $5 shortly.

Please let me know if you receive it and it'll be on the list next time you update it.

Thanks,
Rod

[Tracy_ptp]

Hi all, back from Tunaball, We had a good time. Posted a couple pics under the tunaball announcement in Paintball talk. I will try and update the list by tomorrow before I leave for Cali. I will do my best to get online to check messages and the forum while I am gone, but if for some reason you don't hear from me, please don't worry I will definitely get back to you when I get back.

[Frizzle Fry]

Then I will be driving back to Maine...

ROAD TRIP!