Round Two

[greezypete]

LOL , Im in Oklahoma and I just got mine today. It took as long to get here as it did to get to the UK. Apparently we have SLOW postal people here.

It looks great by the way. I wont get to try it for a while though.

Thanks ZAP.

[gremlin75]

#40 received today

Though it wont fit into the UMF frame without more mod'ing them I'm capable of doing

I'll have to PM you Zap and see if you can spare some time to fit it to the frame some time after the new year.

later
gremlin

[gunman_2000]

that sounds like bad news for me then
we'll see when I get it I suppose.

[lil'Greg]

my order arrived in sunny Queensland Australia on friday, after quick and i mean very quick inspection all looks good, cheers MR MAD

[ta2maki]

Opened #42 today(received sometime last week). Beautifully packaged. I was worried when I saw the bubble mailer but was pleased to see the cardboard sandwich inside.

Zap, I'm trying to fit this in a chimera frame. For optimum operation, how far should the piston/cheater assembly be from the sear at rest? If I just drop it in, the sear looks to be riding right up against the piston(which is pushed all the way in).

Is there a install guide somewhere? Did a quick search, but didn't find anything.

[El Camino]

Opened #42 today(received sometime last week). Beautifully packaged. I was worried when I saw the bubble mailer but was pleased to see the cardboard sandwich inside.

Zap, I'm trying to fit this in a chimera frame. For optimum operation, how far should the piston/cheater assembly be from the sear at rest? If I just drop it in, the sear looks to be riding right up against the piston(which is pushed all the way in).

Is there a install guide somewhere? Did a quick search, but didn't find anything.

Here, this may help, it's Zap's web site. Go to Ghetto Gun Shop.

http://zapsmadhouse.freeforums.org/index.php?sid=9b62588e82857cacdca2fbffb31cabf2

[Shirow]

Mine should be arriving today then (I hope!)

[bbotts77]

Mine should be arriving today then (I hope!)

It should. I think mine got here on Saturday. I just opened it.

[Stayhuge]

Opened #42 today(received sometime last week). Beautifully packaged. I was worried when I saw the bubble mailer but was pleased to see the cardboard sandwich inside.

Zap, I'm trying to fit this in a chimera frame. For optimum operation, how far should the piston/cheater assembly be from the sear at rest? If I just drop it in, the sear looks to be riding right up against the piston(which is pushed all the way in).

Is there a install guide somewhere? Did a quick search, but didn't find anything.

Hi, I dropped mine into a chimera. I had to dremmel the front corners of the cheater to get it to sit a little forward. I then fit it to the point that the trigger doesn't activate the cheater when the safety was on. This worked perfect for me. I think I am about an 1/16" from the sear. I think you can also move it a little further away. I remember someone saying that about an 1/8" is idea. Trick is to move it a little away, test it. If it seems to be shortstroking quite a bit, move it a little further from the sear, and repeat until you are comfortable. Hope that helps. You can see some pics of mine in the paintball talk section. The thread is titled "Pneumagf complete, for now..." Good Luck

[Big'n slo]

Mines prolly under 23" of snow

[Shirow]

Hi, I dropped mine into a chimera. I had to dremmel the front corners of the cheater to get it to sit a little forward. I then fit it to the point that the trigger doesn't activate the cheater when the safety was on. This worked perfect for me. I think I am about an 1/16" from the sear. I think you can also move it a little further away. I remember someone saying that about an 1/8" is idea. Trick is to move it a little away, test it. If it seems to be shortstroking quite a bit, move it a little further from the sear, and repeat until you are comfortable. Hope that helps. You can see some pics of mine in the paintball talk section. The thread is titled "Pneumagf complete, for now..." Good Luck

How did you adjust the trigger rod? Do you have to grind it down or does it screw in and out like a sear?

[Stayhuge]

How did you adjust the trigger rod? Do you have to grind it down or does it screw in and out like a sear?

It actually fit perfect. Not too long (When the safety is on, it won't fire) and not too short. Just right. If it were too long, you would need to grind the trigger pin down. The pin is actually a separate piece. It fell out of mine when i took it out of the package. I just put it back in, and was good to go.

The cheater system is a neat little setup. Much easier to install than I thought it would be. I have set up pneumags before, and I must say this is literally a DROP IN compared to a regular pneumag. Even with the Magnus frame, there is more tuning needed than this little thing. and the Cheater runs at a rediculously low pressure. I built a pressure test gauge that I am going to give a shot this week. Just need to find my LP gauge.

[Sneaky Sir]

Got mine today! Wohoo! Now I just need my X-Valve to arrive and I can test it out.

And for those of you wondering, the Cheater does drop right into an Airwalk Frame V2, but you will need to drill in some new screws spots for the screws to lock into, but otherwise we're good to go.

[lil'Greg]

Just waiting for my MicroMag to get through Customs then in am going to smoke fools INSTYLE

[Shirow]

I got mine today, will post a long write up shortly in the general forum.