Logic Ripper EM - The Electro Solution - PreOrder

[CoolHand]

Currently working on Derek's machine work.

I'm about 25% done with his machine work, but I am also out of time for the moment.

Hang in there, it is moving along.

It's always a good sign when chips have been made.

[CoolHand]

This week and next are a total wash, sorry guys.

I'm going on three 16 hr days in a row now, with no end is sight.

Please be patient fellows, I hope to god that things slow down by October. (This project must be delivered on Oct 3rd, so it HAS to be done, or we take it on the chin with liquidated damages).

When I get the chance, I have to cut Derek's eye covers, clearance the VA for the LP hosing, bore and tap the LPR port, and cut an adapter plate.

Still a lot of work on his marker, but hey, it's a nearly ground up custom, so it's gonna have a lot of fab work in it. It's gonna be sweet as hell though. Even I'm stoked to see it finished.

Still waiting on Sam from Vapor Works to get me those boards, but he actually answers my emails and I believe him when he says it shouldn't be much longer (they end up with the wrong mosfet someplace, or something like that, so the whole batch needed some work).

At any rate, there's the best update I can manage in my weakened state ( ), hopefully I will get a break in a week or so and I can make some more chips. Then maybe we can have a few pics.

[Arstron]

Thanks for that update, I can't wait to see those pictures of the current progress, it sounds like somone is going to have an amazing gun.

I have already talked to coolhand, but for everyone else, I did recive a new chaos board a couple days ago. You guys will be very pleased with the vlink software, it makes programing the board a breeze.

[UTDragun]

bump back to page 1

[CoolHand]

Not a lot to report, except that Goldie has gotten me an invoice for the boards, which means they should be pretty durned close to shipping.

They will come with the VLink cable and software, which is nice.

I currently have Derek's frame scattered out on my desk, pondering how I want to do a couple of things.

It ain't moving real fast, since I have almost no free time, but it is still moving along.

Hang in there guys.

[SpecialBlend2786]

Not a lot to report, except that Goldie has gotten me an invoice for the boards, which means they should be pretty durned close to shipping.

They will come with the VLink cable and software, which is nice.

I currently have Derek's frame scattered out on my desk, pondering how I want to do a couple of things.

It ain't moving real fast, since I have almost no free time, but it is still moving along.

Hang in there guys.

Keep on truckin'

Glad to see things are working out for the most part!

[DaveSM]

Back to the top

[CoolHand]

Back to the top

Paid Sam for the Chaos boards.

I am working on some parts for Derek's frame which ended up having to be CNC cut, so that's taking a while. It's moving along though. Shouldn't take long to actually cut, but with the CNC work the programming is about 4/5 ths of the time used anyway.

Nothing else to report. Still busy has hell at the day job. Hopefully that will let up a little after I get this shopping center wrapped up in October. We shall see.

[behemoth]

Paid Sam for the Chaos boards.

I am working on some parts for Derek's frame which ended up having to be CNC cut, so that's taking a while. It's moving along though. Shouldn't take long to actually cut, but with the CNC work the programming is about 4/5 ths of the time used anyway.

Nothing else to report. Still busy has hell at the day job. Hopefully that will let up a little after I get this shopping center wrapped up in October. We shall see.

Keep truckin' ryan.

[Arstron]

Glad to hear the updates and very glad that we dont have to sit in the dark and wait like other custom shops make you do.

[DaveSM]

Paid Sam for the Chaos boards.

I am working on some parts for Derek's frame which ended up having to be CNC cut, so that's taking a while. It's moving along though. Shouldn't take long to actually cut, but with the CNC work the programming is about 4/5 ths of the time used anyway.

Nothing else to report. Still busy has hell at the day job. Hopefully that will let up a little after I get this shopping center wrapped up in October. We shall see.

So your project at your job is a shopping center? Wich part of it are you involved into?

As for the CNC programming I understand

Here a few pics of the CNC machining I have done lately.

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-03-01_usinage_clamps/IMG_1095.jpg

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-05-03_usinage_top_part2/Photo%20027.jpg

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-03-19_usinage/Photo%20041.jpg

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-03-19_usinage/Photo%20046.jpg

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-04-02_usinage_top/IMG_0737.JPG

I always said that CNC machining is easy once the program is completely tested For the rest of it you can use a bright monkey

[CoolHand]

So your project at your job is a shopping center? Wich part of it are you involved into?

As for the CNC programming I understand

Here a few pics of the CNC machining I have done lately.

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-03-01_usinage_clamps/IMG_1095.jpg

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-05-03_usinage_top_part2/Photo%20027.jpg

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-03-19_usinage/Photo%20041.jpg

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-03-19_usinage/Photo%20046.jpg

http://sonia.etsmtl.ca/private/webPrive/photoalbum/2006/2006-04-02_usinage_top/IMG_0737.JPG

I always said that CNC machining is easy once the program is completely tested For the rest of it you can use a bright monkey

The proving out of a new program is not for the faint of heart, that is for sure. I'd not put a trained monkey to doing that, unless I really didn't like him. Thinks can get real interesting real fast.

I am the project engineer for the shopping center in question. I designed and supervised completion of all the site work (heavy and finish excavation & grading, storm water detention, infrastructure, etc), as well as supervising some of the actual building construction. I supervised the concrete work and structural steel hanging, and right now I'm in the middle of sheparding a build-out for a good sized national tenant (they had their own architect do the design, if you could call it that, suffice to say that I am not impressed with their work).

[UTDragun]

Bump back to page 1

How bout dem Vols

[Phurious]

I hate to do this now but.. . .

I don't want to create any issues now when I am SOOOOO close but . . .

I currently have the #2 Marker; a COMPLETE custom marker. I also now have a ill child, and need the cash more than I need the marker. If anyone is interested please PM me. We can get in touch with Cool Hand to verify ownership of the marker to the buyer.

[zackzel]

I don't want to create any issues now when I am SOOOOO close but . . .

I currently have the #2 Marker; a COMPLETE custom marker. I also now have a ill child, and need the cash more than I need the marker. If anyone is interested please PM me. We can get in touch with Cool Hand to verify ownership of the marker to the buyer.

Good luck selling that man, I definatly feel for you.