Logic Ripper EM - The Electro Solution - PreOrder

[Arstron]

Last I heard about Goldie from Vapor though, was that he had some family problems and was also moving into a new house for the past few months (heard it on pbn).

The same thing was said on the tinkers guild, ive had a hard time staying in contact with him also, then again I only have one board with problems...

[CoolHand]

The boards, harnesses, V-Link cables, and Software CD's all showed up today.

Unless something is wrong with them, I have boards now.

WOOOHOOOO!!!!

Now I just need to finish installing the DRO on my new milling machine and I can get back to work on these beasts.

I'm still a little gimped up from a not so minor machine tool accident I had about a week and a half ago. Once the stitches come out and I'm back to 100% I'll be tearing into the DRO install and then getting the CNC machine back together (I had a coolant pump die on me). I hope to be back in action by the weekend of the 16th of Dec. Keep your fingers crossed that all has healed as it should have.

Stay tuned folks, Derek's marker is about 60% done right now, so it'll be the first one that pics will show up for.

[Triangle]

The boards, harnesses, V-Link cables, and Software CD's all showed up today.

Unless something is wrong with them, I have boards now.

WOOOHOOOO!!!!

Now I just need to finish installing the DRO on my new milling machine and I can get back to work on these beasts.

I'm still a little gimped up from a not so minor machine tool accident I had about a week and a half ago. Once the stitches come out and I'm back to 100% I'll be tearing into the DRO install and then getting the CNC machine back together (I had a coolant pump die on me). I hope to be back in action by the weekend of the 16th of Dec. Keep your fingers crossed that all has healed as it should have.

Stay tuned folks, Derek's marker is about 60% done right now, so it'll be the first one that pics will show up for.

SUCKERS

[mobsterboy]

SUCKERS

dallara much?

[RFLMN1]

I bought EMAG2005's place in line can you tell me what number I am? Thanks

Jason

[CoolHand]

I bought EMAG2005's place in line can you tell me what number I am? Thanks

Jason

Well, #1) He has to PM me and tell me that. It's the only way that I know for sure the spot has changed hands.

AND

#2) I need both of your real names, and your shipping address before I can say when who how or even what.

Do those two things and I'll let you know.

[Triangle]

dallara much?

You have no idea.

Well. You do.

Why'd you get rid of yours man?


Also: SUCKERS

[going_home]

# 2 Spot ?

The boards, harnesses, V-Link cables, and Software CD's all showed up today.

Unless something is wrong with them, I have boards now.

WOOOHOOOO!!!!

Now I just need to finish installing the DRO on my new milling machine and I can get back to work on these beasts.

I'm still a little gimped up from a not so minor machine tool accident I had about a week and a half ago. Once the stitches come out and I'm back to 100% I'll be tearing into the DRO install and then getting the CNC machine back together (I had a coolant pump die on me). I hope to be back in action by the weekend of the 16th of Dec. Keep your fingers crossed that all has healed as it should have.

Stay tuned folks, Derek's marker is about 60% done right now, so it'll be the first one that pics will show up for.

Who owns the # 2 spot ? I own the # 10 spot.
I will pay to trade down. If someone who already owns a place in line is interested,
PM me if you need a couple pesos and dont mind moving further down the line
to the # 10 spot .
I'm not talking about buying another marker, just moving closer to the # 1 spot.
And I do so hate for this thread to get off the first page.

[CoolHand]

Did you win the lottery or something?

I've seen your name on like 45 Ebay auctions in the last two weeks.

Alright you, gas. What's the deal!?!

[luke]

Now I just need to finish installing the DRO on my new milling machine and I can get back to work on these beasts.

New mill? Do tell.

I'm still a little gimped up from a not so minor machine tool accident I had about a week and a half ago.

Ouch, what happened?

Sorry for the hi-jack, if you prefer to keep your thread all business, I'll delete this post, no problem.

[mobsterboy]

You have no idea.

Well. You do.

Why'd you get rid of yours man?


Also: SUCKERS

donno actually. I'll prob end up picking up a chord or a karta before its all said and done
/not sucker
//joe is doing EP's too
///

[CoolHand]

New mill? Do tell.





Ouch, what happened?

Sorry for the hi-jack, if you prefer to keep your thread all business, I'll delete this post, no problem.

I found a honey of a deal on a Sharp LMV-50 only one state away, so I took it. Bought a Newall C80 DRO to hang on it at the same time. Sweet deal, I just gotta get back to the shop and get the DRO installed so I can use the blasted thing.

About a week after I bought the Sharp, the Bridgeport had a fit of jealously (aided in no small part by my own stupidity) and bit me good.

I had an 18" long folded sheet steel piece in my Kurt vise, trying to cut a counterbore for a screw to seat in, when the end mill I was using bound up and pulled the piece out of the vise. It swung around whacked me on the right forearm and basically ripped my abdomen open. The scar is about a foot long, but only about half was deep enough (~1/4"-1/2" deep) to need stitches.

All told, I got two pretty gnarly scars out of it, and 15 stitches in my gullet.

I pulled the stitches out Monday before last though, so my gullet is now fully operational again.

I will offer this advice, do not work sheetmetal in a smooth jawed machinist's vise.

Whirling Wheel of Doom = BAD.

[going_home]

Number One !

Did you win the lottery or something?

I've seen your name on like 45 Ebay auctions in the last two weeks.

Alright you, gas. What's the deal!?!

Mr Triangle has graciously traded his spot number 1 to me for my spot number 10.
Can you imagine an old fat guy doing the happy dance ?

No I didnt win the lottery.
And Ebay..... well its sure enough there.

[zackzel]

Well I am number 5. Hopefully with the new equipment and the boards showing up I can see mine by summer.

[Sumthinwicked]

Well I am number 5. Hopefully with the new equipment and the boards showing up I can see mine by summer.

im jelous just using my hyper LOL