The MAGnificent Mysterious leak No one can Fix.

[Grimmstone]

I have a trigger/rail leak as many posts Ive been reading have and been trying to fix this but no one seems to be able to. But heres my story.

Quit playing in 2006 and gun been in bag since. Some friends "discovered" paintball and wanted to play so I ofcourse dusted off my Mag....

[ZalmoxisX]

I just got back into Paintball after taking a break for about a decade; getting married and starting a family tends to do that. I have a Warp Feed on an Auto Mag with a Warp Feed body and another Warp Feed on an Invert Mini. Of going out using old plastic adapters that are 10+ years old they both...

[temilotzin]

I have an RT valve that works fine with level 7 bolt. However, when the level 10 bolt is on, even with smallest carrier, it leaks down the barrel. And not a little leak, full throated tank dump leak. Any thoughts on the issue?

[ideinit]

Update: Solved! See https://www.automags.org/forums/show...66#post2934566

-----

Hoping AO community can help me with this. I have used mags for almost 20 years and I am fairly confident in my troubleshooting skills...

[temilotzin]

My X-Mag is going full auto in mechanical mode. It has never done this before, tank input pressure is 850 psi. Is this an 0-ring issue? If so which one?

[cbstalter]

[Solved]

I've got an X-Valve that wants to go full auto as soon as I put pressure on the trigger.

Current set up is L10 and ULT with 3 shims.

I put an RT on/off in there to eliminate the ULT being the culprit. Same results. At this point I'm thinking reg...

[Mondoatx]

I was working on a gun behind the counter yesterday and this young guy comes up with a classic mag and asks me to take it home and fix it...

Only weird thing about it is the trigger geometry... check this out:



The trigger is angled back... which is odd... and

[Bunny]

Has anyone else seen quad orings melt? I had some issues with my red SFL and pulled out the quad O-Ring and it melted to the on/off pin.

I spoke with Dirge who had that issue a few years ago. Has any other AOers seen this happen?

I had the gun dialed in Virginia, drove

[knownothingmags]

was firing fine in emode.
then now when the magnet gets near the hes it just shuts the screen off and does not trip the sear.
the battery is fully charged.
the battery works great on my other emags.

for the emag that is not tripping the sear.
i have check my...

[Mondoatx]

Hey guys,



Picked up this classic mag for pretty cheap... it is VERY similar to the one I sold when I was 18 after spending a ton of money (at the time) upgrading everything (in other words... it is the one that got me to fall in love with them... and it got away)... Selling...

[Steamburn]

I have a Minimag body on the raw which I would like to send to be anodized.
Any recommendations on who can do it?

[ideinit]

hi all,

I have a XValve, LV 10, ULT mag that's been working flawlessly for years.

It took a hit right next to the ULT in a recent game, so I took out the XValve, pulled out the ULT to clean out all the paint that has seeped in. After lubing and reassembling, it started...

[roninjotatan]

Had a mechanical mag that worked fine with x valve and ult (came together on ebay), ule main body. Purchased a e-mag lower and also a new board from p8ntbal4me (board kicks ass btw) and knew I had to get a new on and off from AGD (ult would pause between shots while it recharged with the emag lower)....

[ideinit]

I have recently bought an ULE body and as I've read on the forum, I need to "stamp out" the twist-lock assembly.

What would be the best way to go about doing this since I don't have access to a press? I took the spring and the pin out of the assembly, then pounded it with a...

[ideinit]

My mag setup:
- LV 10 (no shims)
- x-valve
- ULT (4 shims, pin is 0.75")
- Stock powerfeed body custom welded to vertical feed
- classic rail
- Powerlyte Powerstix frame
- Trigger rod about a credit card thickness from trigger back...