Here's my baby. All I want to add is level 10, maybe a better tank. I'll start with the specs, then on to the pics:

-black Minimag body pf/hr with reversed Minimag valve
-black

Here She Is
My goal was to build a mag that looks like it could have come straight from AGD











Thanks to everyone who took the time to design and build these parts.













...

Anyone ever see an Aurora Karta? This Karta was plated by CutStep and Oddpb.com in 2008. ...

AO: While putting together xmagworld.com again, I did a lot of research about the infamous Shatner Xmags. It was pretty fun tracking down 3 William Shatner Xmags, but after all my research I realized

I bought this of the AO forums with the intention of doing a box mag type feed. http://www.automags.org/forums/showt...ject&p=2833484 but already having a emag and building a double barrel mag I have enough in the way of rate of fire so decided to do a mag fed marker and then thought why no a fs platform. I sent the ULE body to Xmag Terror after talking to him about it to get the feed port milled out and a new feedneck built to run the fs rounds. got it back very q...

So this was a project I have been wanting to do for awhile and I actually almost finished this within a week.
Here is my original idea pics:


I originally wanted Macro fittings on the outside and inside, but there wasn't enough room. I ended up going with micro line and I had to do some internal milling to make sure the sear didn't hit the air line. I milled the hole on the right side of the frame, but because of the internal...