MiniMag Carbon X Edition

Collapse
  • Created by: Mole1119
  • Published: 04-09-2015, 08:16 AM
  • 0 comments
X
Collapse
  •  

  • MiniMag Carbon X Edition

    Here She Is
    My goal was to build a mag that looks like it could have come straight from AGD











    Thanks to everyone who took the time to design and build these parts.













    Tags: None
        Posting comments is disabled.

      article_tags

      Collapse

      Latest Articles

      Collapse
      • My Minimag is almost complete!
        by tysonmachado
        Here's my baby. All I want to add is level 10, maybe a better tank. I'll start with the specs, then on to the pics:

        -black Minimag body pf/hr with reversed Minimag valve
        -black
        04-23-2017, 01:58 PM
      • MiniMag Carbon X Edition
        by Mole1119
        Here She Is
        My goal was to build a mag that looks like it could have come straight from AGD











        Thanks to everyone who took the time to design and build these parts.













        ...
        04-09-2015, 08:16 AM
      • Aurora Karta E-mag
        by Bunny
        Anyone ever see an Aurora Karta? This Karta was plated by CutStep and Oddpb.com in 2008. ...
        01-10-2015, 10:47 AM
      • William Shatner Xmag Project
        by Bunny
        AO: While putting together xmagworld.com again, I did a lot of research about the infamous Shatner Xmags. It was pretty fun tracking down 3 William Shatner Xmags, but after all my research I realized
        06-03-2014, 07:46 AM
      • mag fsr sniper rifle
        by Syko89
        I bought this of the AO forums with the intention of doing a box mag type feed. http://www.automags.org/forums/showt...ject&p=2833484 but already having a emag and building a double barrel mag I have enough in the way of rate of fire so decided to do a mag fed marker and then thought why no a fs platform. I sent the ULE body to Xmag Terror after talking to him about it to get the feed port milled out and a new feedneck built to run the fs rounds. got it back very q...
        06-03-2014, 07:45 AM
      • Sk8ermog Project #2 - Gas Through M86 Trigger Frame
        by Sk8ermog
        So this was a project I have been wanting to do for awhile and I actually almost finished this within a week.
        Here is my original idea pics:






        I originally wanted Macro fittings on the outside and inside, but there wasn't enough room. I ended up going with micro line and I had to do some internal milling to make sure the sear didn't hit the air line. I milled the hole on the right side of the frame, but because of the internal...
        06-03-2014, 07:25 AM
      View All
      Working...