** Official Level 10 Problems Thread **

[Arturus]

Originally posted by robert heatwole
i turned up my velocity all the way and it still wont fire HELP

Try reading through the other posts on this thread...

Since we're at it, try a shorter spring. If that alone doesn't work, then use a carrier one size larger.

[robert heatwole]

found the problam didnt have enough pressure in my tank

[paint king]

wel......

Okay guys i got the gun to fire at a decent volocity without leaking with 1 carrier 2 shims and middle spring. But it chops still. I dont know what to do. Any advice would be great. Thanks.

[Peanutt]

AGD: call us for a replacement bolt

Hey Tom, I shipped my bolt about 3 weeks ago and I havent got it yet. I was wondering if they are backed up with other lvl 10 orders and if I should give them a call??

[paint king]

last........

Well i have been at work constantly on my level ten and it still chops. I can use any carrier from 2 to 0 and it doesnt leak. I can use up to 4 shims without it leaking. I can use the middle spring also. I have tried every combo and it still chops. What am I doing wrong? I would really appreciate some help. Thanks. By the way I have also noticed that the valve is not reseting fast enough instead it hesitates before it resets, sometimes i have pull the trigger another time for it to reset. Thanks.

[SIGSays]

BlackVCG edit: Grow up. You're not worthy of being a beta tester. That was part of the deal in buying LVL 10 right now and a post like yours is a complete waste of forum space. Post something like that again and you're banned for good.

[Peanutt]

i'll take your bolt if u dont want ur lvl ten SIGsays

[lillfroboy]

Hey what happens if i dont have the backing washer

[paint king]

um.........

SIGSays if you are talking to me then just calm down. I was just asking questions so i could get my level ten going. In your eyes i guess im not worthy of being a beta tester but im just trying to work out the bugs with it so it works. Isnt that the point of having it beta tested? So that if some people cant get it installed you can find out whats wrong with the product (There isnt but if there was) or the troubles people are having installing it so that when it does go into full production people dont have a hard time getting it to work. Sorry if this post upsets you but thats how I see it.

[hitech]

Add shims to get it to vent eariler. Go back and read your old post, BlackVCG added comments to it via an edit.

[Moats]

lilfroboy

lilfroboy

look for a white one. My backing washer was white.

[BlackVCG]

Paint King: Sorry for the confusion. I edited SigSays' post because it was full of foul language and completely bashing LVL 10 because he was too stupid to figure out how to get it to work. The comments in his post are mine and I reedited it so it should be more clear as to those being my words and not his.

lilfroboy- The setup will work without the backing washer, but you risk popping out the white carrier o-ring into the air chamber while you're shooting. Get the backing washer so it pop out and leak like a sive while you're on the field playing.

[Moats]

Originally posted by Jason Reed
I have l-x installed, 1.5 carrier, 2 shims, longest spring. I have noticed that the valve is not getting reactive, instead it hesitates before it resets, sometimes i have pull the trigger another time for it to reset. i want my reactiveness back and still want to use l-x. can ya'll help.

I am having the exact same problem, can someone help us out.

[paint king]

k.....

Okay sorry about th emix up. My fault.

[Jason Reed]

Hey ya'll give me and moats some help. you have helped evryone else out but us. come on it is frustrating not being able to have your gun work at 100%. please help.