** Official Level 10 Problems Thread **

[sharpshooter1286]

nope it wasnt like that, i traded my tippmann for the mag straight up, which is kinda even considering how broken it was (the mag)

[Pingapapoo]

This is pissing me off!!!

I bought the LX and have been trying to tune it so that it doesnt leak air EVERYWHERE....Its not leaking down the barrel or out the back..Right where you screw it in...The vertical ASA....I've tried every carrier...No shims, 1 shim, 2 shims....Its just not working.....Im dying to test it out....

[extream86]

lev10

this is my setup

1.5 carier
no shims
small spring
reg is turned all the way up
volocity is turned all the way up

it only shoots about 250-270 fps, how do get fps higher

[BlackVCG]

You might have to replace your spring pack. Is it a regular valve or RT valve?

[extream86]

its a regular valve, when i put in the meddium sping in, it wount shoot, it dosent leak, but ther is still pressure in the valve when you pull the trigger.

[rmhawk]

try the smaller spring

[extream86]

if i have the small spring in i can only shoot about 250-270, and thats not good enogh!!

[polodude1111]

Hey, heres my problem:
I just installed the level 10, and I'm at the part where you fire the gun. The problem is, is that it won't fire. I've tried all 3 of the springs, and it won't fire at all. With the smallest spring, it gave a few puffs. So, what do I do?

Thanks for your help

[rmhawk]

crank it up!

the air that is

[polodude1111]

Oh, I forgot to mention that part: I had the air up as high as possible.

[rmhawk]

go up one carrier size, but use the same o-ring your currently using

[polodude1111]

Okay, heres the situation now:
I've got the thumb adjuster thingy all the way over, so the velocity should be at its highest.
I tried going up a carrier, so I tried the 2.5, 3.0, and the 4.0, and they progressively leaked more out of the barrel and still didn't fire. All the while, I'm still using the "cut" spring. I think thats all, any more suggestions?

[rmhawk]

start over with the 2.0 carrier and a different o-ring. no shims. remember, add a small drop of oil to the oring.

[polodude1111]

I'll try some more stuff in the morning, but thanks for your help

[polodude1111]

update: with the 2.0 carrier, no shims, and velocity maxed, there is no leak down the barrel but the gun does not fire when the trigger is pulled.