cool thanx man
-
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow Stub -
the 12v mod link doesnt work
the link to the 12 v mod doesnt have any pics or instructions or anything worth while. maybe i am going to the wrong place, but this is where that link takes me:
Adamsoon to come:
minimag w/ intelliframe
warp
12v X-board
2002 AA 12''
SystemX X10 On/Off Drop
TKO Gas ThroughComment
-
-
are there instructions, because i have no idea how that is supposed to be pu together and what not......
adamsoon to come:
minimag w/ intelliframe
warp
12v X-board
2002 AA 12''
SystemX X10 On/Off Drop
TKO Gas ThroughComment
-
that's as easy as it gets, goto radio shack, buy a 12v regulator you can get that and a toggle switch and follow the diagram. If you'd rather not do it, your local dealer might do it for you.Last edited by Havoc_online; 10-16-2002, 05:08 PM.Comment
-
Pro-Team Products has made a bunch of these and has them available. They do a nice job and you can just drop one in if you don't want to make one yourself from radio shack parts.A good friend is one that will come and bail you out of jail.
A great friend is one that is sitting next to you in jail saying "Man that was F#%*ing Awesome"!
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------Comment
-
ya thanks for the idea, I put a link up on top...Comment
-
hey havoc, I am intellifeeding my warp and I was wondering, where in the trigger pull should I have the micro-switch click, is it better earlier in the pull or later in the pull,
thanx
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow StubComment
-
I spent three hours making a how-to page on my site for hooking up a switch and using a 9.6 1600maH re-chargeable RC CAR battery pack for powering your warp.. CIO!
Pm me with any errors you find..or if you have problems.. OR..if it's just not understandable.. I may have to re-write it..
Comment
-
what type of trigger frame do you have? just set up the roller switch like it is in the pics.hey havoc, I am intellifeeding my warp and I was wondering, where in the trigger pull should I have the micro-switch click, is it better earlier in the pull or later in the pullComment
-
I-frame, and hey does AGD do any kinda warranty work on the warps?b/c my is broken and I have no idea what is wrong w/ it
also can the warp function w/ only one of the jumpers?
do you know some one who can fix or does fix warps?
thanx
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow StubComment
-
what exactly is wrong with the warp(whats it doing?) and what have you done to it. Yes, they fix warps(or send it to me and I'll fix it
)
how are you running it?(signal pins only need one jumper)Comment
-
it just doesn't do anything at all, It will not spin, I have it set up for intellifeed and it doesn't work either,
could you fix it for me, I will pay you like 10 bucks plus shipping both ways
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow StubComment
-
go ahead and ship it to me, pm me with details.Last edited by Havoc_online; 12-21-2002, 02:55 AM.Comment
-
how do you mount this on a gun? I've been thinking about getting one someday, but I want to know all the details. And will this make my gun really unbalanced?Proud Owner of a Phantom, Mag, and Tippmann
Comment
Comment