ALL about the WARP-FEED

[eljimbo]

Warp

I just tied my warpfeed into my ghetto morlock controlled e-cocker. I just cut the wire going to the vibration sensor, soldered wires from the output to the second solenoid on the morlock. So the warpfeed is essentially turned on by the 45-60ms second solenoid pulse. However it seems the fast I pull the trigger the less time the warp is actually on per trigger pull.

[SI|ENT|3O|3]

"yeap, same as you would a revy." can i get some instructions?

[Brunno]

hey i am in the same pickle as Lawfox. Mine is broken and it just doesn't do anything. Would you be able to help me out as well?

[minion450]

I love AO

I just have to say i love AO. I am an Angel user and stubled apon these forums. I got every question i ever needed answered her for my Angel. Then i was having some probs with my Warp, got all my questions answered in that as well. Because of Automags site helping me in all my paintball needs even in products that are not their own i am going out and buying a Mag. Especialy because they are cool enough to have A forum for a product of a differnet company.
I LOVE YOU GUYS.


p.s.
any suggestions on a Mag under $300. I have a spare CA tank already.

[Hitcat]

Warp feed.

Hello, I have a warp feed and the 12v upgrade.
I want to make it spin with every pull as I dont care much for the vibration sensor. I have a mako Storm trigger frame on a Piranha, Yes I said piranha ;P.
There are 4 wires I am looking at to hook up. 2 toword the selinoid and 2 into the trigger. WHich ones would I hook up I tried the ones to the trigger once already and it constantly spun which yeah would be great but I'd burn motors left and right. I'm wondering if maybe my wires in the plug were touching completing a circuit. Working on it based on the angel hookup. Any insight that may help would be appreciated.
Hott

[minion450]

Has anyoned noticed a wierd reaction to your warp 12v if you use Duracell Ultra. I had a regular Duracell and when i pluged the Ultra in it wouldn't stop spinning, and it was spinning fast, faster than it usualy does at 12v. Its like the Ultra just passes threw the 12v regulator. Thought it was wierd and worth mentioning.

[Havoc_online]

JodoCast
did you ever get it working? Email me if you didnt.

eljimbo
You didnt have to do that, resolder the wires on the vib. sensor(if you can). Then use the wires you had them hooked up to and build a connection plug(just like you would an intelliframe hook-up). Plug it into the warp board and set your right set of jumpers so that the only jumper(shunt) connected is the mid(pos.)

SI|ENT|3O|3
boil some water in a big pot, pour in some Rit dye, dip the shells in till you have a color you like, take em out and dry.(all this is at your own risk). search and you sould come up with better directions.

Brunno
no problem, pm or email me details

minion450
Glad to hear it! try the classifieds or Ebay(make sure whoever you buy from has good feedback)

Hitcat
I'm not too familiar with the wiring on a piranha, perhaps goto your local shop and ask them which wires you could tap into in order to receive a pulse or pm vern1 here on AO, he might know cause he's the man .

minion450
I only use E2's(very light) so never noticed but thanks for the input.

[ShooterJM]

I'm getting a warp shortly. Does anyone have a guess at how many shots a warp with fresh batteries? I'm trying to determine if it'd be better to design a single power source to run everything.

[minion450]

i had to have gone threw about 3 cases with alot of time in between and still had power

with the cold weather i had some problems though. also now i have upgraded to 12v so i don't know how long they will last

hope that gives you an idea

[Havoc_online]

it all depends on how you use the warp, if it's running off the sensor, the batteries wont last as long as if it were running off an intellifeed cable. If your worried about battery life just run two 9v's in parallel to make a bigger cell.

[JodoCast]

i got it havoc thanks

thanks for you help

one question is the emagnum board worth it

and do you know where i could get a blade trigger for emag

thanks again

will

[Havoc_online]

glad to hear it!

Emagnum board is NOT worth it.
and to get the blade trigger, just pm or Email anyone from AGD pride.

[ShooterJM]

Originally posted by Havoc_online
it all depends on how you use the warp, if it's running off the sensor, the batteries wont last as long as if it were running off an intellifeed cable. If your worried about battery life just run two 9v's in parallel to make a bigger cell.

Would you reccomend intellifeeding just the warp or the warp and the revy.

[surfer349]

where to get the 12 volt converter?

hey,
i checked my local radio shack to see if i could get a 12 v converter for the mod, but they said they didnt carry it; never have, never will.

so where can i get one, or should i just use that battery pack mod where one can use a battery pack off a remote controlled car?


adam

[minion450]

somthing wrong with that radio shack then.