ALL about the WARP-FEED

[Just Me]

warp

Howdy I just got my AGD warp feed and I have a couple or three of NOOB questions:1) after the run in period will the vib sensor settle down to a steady spot? as it goes right now I have to adjust it every time i want to feed balls correctly with each shot. 2) does the kit only come with 2 mounting screws? since I havent been running a drop forward or bottom line, I dont have an extra set of screws for the mounting plate. could you give me the specs on them(metric/standard adn what size) so I can try to get a couple more? 3) I am running a old school PF/Hopper left MAG and i dont have to worry about out shooting the warp or my revy but I want to get more battery life could you tell me how to set up a on/off switch inline with the paralell 9 volts?
Thanks
Just Me

[Havoc_online]

ok guys, most of the info is in the first couple of pages.

Remember - in order to transfer vibrations properly you need to have the warp mounted tight.

you want a tight fit with the revy and hose so dont sand it(you dont want it falling off do you?)

[Havoc_online]

warp mod pricing.
by popular demand.

Ok, I probably mentioned this before but I really recommend a "big cell" mod over the 12v mod but since it's your warp it's your choice. Your not going to be pulling anywhere close to what a 12v warp can feed at, it's loud, runs through batteries quicker(It doesnt hold 12v for too long). It can still only really feed as fast as your hopper so to really take advantage of it, you'd have to run a HALO B.

The bigcell mod uses 2 9v's to make the battery last twice as long @9v. It'll feed at about 16-17bps. Again, assuming you have a hopper that could keep up. The batteries last months(if you use the switch properly).

The l.e.d. I can do but I also dont recommend cause it draws needed power from the batteries. It'll slow down the warp and run through batteries quicker. Again, it's your choice.

here are my prices.

on/off - $10
big cell - $15
on/off w/ bigcell - $20
12v mod - $20
12v w/ on/off - $25
l.e.d. - add $4
fix broken warp - case by case basis - pm me.

You MUST also include insured return shipping.

[tb-303]

ok, ok, ok i'm lazy. but i started to look through the posts and wasn't sure what i was to look out for.
i was given a warp feed yesterday and i want to put it on my z-gripped RT. and i don't really know how to go about it. it's a 9v warp and it doesn't have a sensor in it(apparently)
help! what do i need to do?
thx in advance.
teebs

[Havoc_online]

If your warp doesnt have THIS mounted on the shell then you need to send it in for a new sensor. You'd have to intelifeed it to have it work otherwise(which is pretty tuff to do on a Zgrip).

[tb-303]

no mate, i don't have one of those. the previous owner had the z warped. i know how to do it now but i dunno where the micro switch thing would go.

teebs

[Havoc_online]

the Zgrip is not designed to be intellifed, it needs to be modified in order to pull it off. That or you can buy an Iframe

[tb-303]

i think i've done it.i dunno what a normal z-grip looks like from the top(only seen mine) but mine has been well and truly milled in the part where the seer would sit. it's an ex storm gun and has been well and truly Bonich and Sosta'd. now all i gotta do is try it!will post a photo if i can get to a digi camera to show you that it doesn't seem to be a run of the mill z-grip.

teebs

[Lesman]

Big Cell

Havoc,

Do you have details on how to do the big cell mod? Do you just put 2 nine volts in parallel? Do you have a schematic/parts list? My warp seems to be kind of a hog on batteries!

[Havoc_online]

pm'd you.

[WARPED1]

Originally posted by minion450
Yeah the looks kinda had me going. I thought they were faster though. oh well a halo is my next perchase when my rt pro comes in

An eVLution 2 does 17bps, a HALO B does 22. Now,which one is faster?

[Yuji]

I'm going to test a egg II against my Halo B tomorrow.

[Blurry]

Jeez i am stressing here

I bought this warp from an AO member he had it setup for intellifeed, but now i have a z and it isnt milled for the intellifeed. so now i have to set it up for vibration it has the sensor i set up the jumpers as shown in the manual and i have been playing with that blue thing from hell to high water cant get it to do anything in vibration is there supposed to be some wires or something making contact on the sensor body or what i am playing in a tourney this saturday and really want use this warp havoc please help me

[JT2002]

try looking for this without taking your whole warp apart.
try looking into the area where the board is from the right side when u hold the warp with the board facing you. the board compartment, look in the right side where its clear, do you see any sorts of springs in there under the board? the vib sensor needs these springs for the connection to be made with the board for vib to work. im pretty sure bout this (right havoc?)

w00t just realized senior member!

[Blurry]

no springs

what can i use from something to substitute got this used so they probably got lost by the dude i bought it from

how many are there