ALL about the WARP-FEED

[Mike Meeks]

Thanks for the info.

If I understand you correctly I will need to pick up the Pro Team 90* for both guns. Plus I may need to make an adaptor for the vert mini. Sound right?

[Koosh]

One quick question because i am such a bonehead...

I just got a warp, and while playing around with it, I hooked up a 9v and left it there for a while... I came back about 1 minute later and picked it up, forgeting that I hadn't put the batter cover on...

When the 9v fell it broke the negative lead off of the board. Looking at how I can solder it back on I realized that there isn't much room for play around there, so i was wondering what can be done about it?

Thanks

[Havoc_online]

Mike Meeks newer warps come with 90* adaptors already. you should be fine with just that unless the vert. mini has a bell style top which I doubt, in which case it's not too difficult to work around.

TheFlamingKoosh you may be able to take it to your local shop(provided someone there knows how to solder) if not your always welcome to send it to me.

[Yuji]

Stack Height?

What is the optimum ball stack height for the warp when running 90* feed adapter? I broke my adapter tightening it and am considering just cutting it down along with my feed tube so that the feed hose is tight to the gun body. Don't want to do it if the a shorter ball stack is going to cause probs.

Heres a pic of where I would like the feed tube to connect to the 90* adapter.

[Havoc_online]

between the 90* adaptor and the breech you should be good so long as you leave enough room for the plug to do it's job and the feedtube doesnt go too far in the adaptor.

[Yuji]

Well, in between me posting and you posting Havoc...I already did the dirty deed. IT's much tighter..could go about a 1/4" more but I'll wait and see. Thx for the help and I'll let you know how it works.

[Havoc_online]

cool. BTW Welcome to AO!

[JT2002]

is that a mayhem?

[Yuji]

Ummmm...no, it's a Tequila Sunrise Matrix.

[Yuji]

Havoc, shall I remove these pix...being this is warp feed forum? Sorry mods

[Havoc_online]

whatever you'd like, no biggie. as long as it's warped!

[JT2002]

yuji slap a warp on that thing so i can look at it day and night . sorry for off topic but how do you like it? ive heard some not good things bout it. Anyways, BACK TO TOPICC!!!!!!!!!111

[Timmy215]

I just recieved a brand new warp feed. It worked when I but it on my gun and shot in my back yard and the first time that i went out to the feild. The second time that I went out to the field and but it on my gun it would only spin when i pressed the button and would not sense my guns vibration each time i shot. It will also spin constantly when i turn my sensitivity all the way up. Any ideas whats going on?

[Havoc_online]

you need to break in the carbon brushes on the motor. just let it run till a fresh battery dies.

then adjust your sensitivity(once mounted, also make sure everything is tight) to your markers recoil.

[johnnyringo]

PTP 12v drop-in

I have my I-frame wired into my warp and just purchased the PTP 12v drop in kit. My question is when I put the kit on the warp feed it just keeps spining after the first shot and will not stop. I take the kit out it works fine. Any help would be great!