ALL about the WARP-FEED

[JT2002]

dont you have any extras of these from previous guns? lol you should find out from someone how to setup teh intellifeed on the emag for ur warp. and intellifeed warp is a diamond in the ruff

[WARPED1]

No extra screws laying around. I have the warp to emag wire, and the roller-switch thing intellifeed wire if I go warp on my PTP Micro. Punkerx1 hooked me up!
I have a Reloader, so I see no reason to wire it, the sound of the warp spinning and the gun firing will keep that puppy spinning!

[WARPED1]

I plug in my wire from the emag board to my warp and it just spins continuously. Why? I thought it spun with every pull of the trigger.

*EDIT* GRRRRRRRRRRRR, Now the black wire popped out of the battery thing, where the 9v goes. Havoc WILL be hearing from me soon.

[EQSeal]

OK, so I just got a used warped Retro Mag with LX and an Inteliframe. (I'm really stoked!) It came with the I-Frame wired to the 12v revy that sits on top of the Warp. Is that good or do I want the I-Frame going to the Warp itself? I'm fairly new to Mags so I really appreciate any help guys. Thanks.

[JT2002]

havoc will need to elaborate on this since i dont know if its possible, but if it is, maybey you should try to also hook up another wire so that the rev and teh warp are intelli. if that s not possible, then you should take the intelli off teh rev and make a intellifeed wire for the warp. its a lot harder to get a vibe sensor on a warp to work well than it is to get a 12v rev to work on its own

[Koosh]

Ok, I figured out one of the reasons my mag has become sir-chops-alot... the warp on it doesnt spin enough when the vibration sensor is activated...

When I don't touch the warp, I get 3-4 shots off then break a ball... so what I was doing today was before firing long strings, I would just hold the white button until I stopped shooting, and I know that isn't good for it, but hey, I didn't get chops ...

So what do I have to get this puppy humming?

[JT2002]

well first, youve got a mag, and i used to have one too, before you spend any more money, go and buy yourself a lvl 10 bolt. it is the greatest thing ever to come to AGD since the emag. it is the most important/ greatest upgrade available for a mag. so before anything make sure you get one of those. then you can send your warp to havoc and have him hook u up with a on/ off switch and either the bigcell mod or the 12v mod. oh yeah, and after lvl 10, save up for an intelliframe, why? because a warp with intellifeed never fails you.

[Koosh]

well first, youve got a mag, and i used to have one too, before you spend any more money, go and buy yourself a lvl 10 bolt. it is the greatest thing ever to come to AGD since the emag. it is the most important/ greatest upgrade available for a mag. so before anything make sure you get one of those. then you can send your warp to havoc and have him hook u up with a on/ off switch and either the bigcell mod or the 12v mod. oh yeah, and after lvl 10, save up for an intelliframe, why? because a warp with intellifeed never fails you.

Ok, done, done and done....

Havoc already installed a bigcell and on/off switch... I'm saving up for level 10... I just didn't send him the gun with the warp for the fine tuning... and playing today, and noticed why it was chopping for the first time.

Adjusting the dwell isn't explained in the manual, so I figured might as well hear it from the pros before I go about screwing it up even more then it is now

I'm happy with my current frame... in isn't intellifeed, but the Auto-response trigger will work well enough.

[JT2002]

at least get the lvl 10 and u will be happy. also how pleased are you with havocs work? im gonna send him my warp soon, lol havoc. but moneys a lil tight with stuff so when i get it to him i get it there

[Koosh]

DOH!

Ok, so the solution of my problem is in the manual, just must have glossed over it! Got it all fixed, no problem.

Oh, and Havoc is a GREAT guy! He even tossed in a few detents, stickers, and a spare PF plug! the work itself was very neat, and I really liked the new battery clips he installed... alot tougher then the cheapo vinyl ones there.

[EQSeal]

Still Wondering

Any insight to whether to link the I-Frame to the 1)warp, 2) revy, or 3) both?

[JT2002]

if there was a goodd way to, id think both. but then again all this time ive been using my timmy with just the warp intellifed and only have small probs sometimes if i try and shoot very long strings

[askman]

instead of big cell, go with 12v, if you are chopping. I set it up to run my revvy and warp from same 12v (Iknow it eats batteries) so that revvy and warp runs together, and I can intelli it as well, if I want it. (don't need it so far) nice and clean setup. I like it. fast loading. fast as you can shoot. seems to keep up at 12-14 bps continuously for a while until hopper gets low without problem. (I can't shoot faster than that )

[WARPED1]

I use a Reloader. Is there really a need to wire the loader? I run the warp to emag wire from the grip thingy.

[Yuji]

Havoc, I installed a PTP 12v harness with an on/off switch. I think maybe I've got the toggle switch wired in wrong cuz my batteries are draining down when it's not in use with the switch in the off position. Do you have a wiring diagram for this set-up? Also, I'm not sure what happened, but with a fresh set of batteries my warp ran for a few seconds then slowed down and one of the batteries was freakin' hot! I un-hooked the battery harness right away and then tried it again later on in the day with no trouble? I'm wondering if I messed up and got my wiring harness backwards...as in long connector to one 9v and the other two short ones to the other battery and warp connection...does this make sense? uggh