ALL about the WARP-FEED

[Comyz]

Yes there is an adapter for a non removable vert feed neck, its called the universal feed and its what im using.

[stormtr00per]

Warp feed problems.

I recently got a used warp feed, I intellifed it, (what a pain), it has no mods. I have a minimag. The guy was using the warp on an emag before. It all seems to work except the paint gets stuck. I can shoot slow , with no problems, but when I try to unload 2-3 balls get stuck. I have it fed to the bottom with a long powerfeed plug on the top. Please help.

[email protected]

[JT2002]

where do the balls get stuck?

[Star_Base_CGI]

Heres a couple things you could try.

Check the dwell time for my photo on the previous page. If you have 3 or 4 jumpers on dwell time consider removing them. The less jumpers you have the more the warp spins. You could try using 2 or 1 jumpers.

Also since it used. You could try a new Belt. They are $1.

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=68&CATID=6

You could also try replacening the eurathane Disk for $6.

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=79&CATID=6

[JT2002]

can you tell us exactly where it is teh balls are getting stuck? this will make it much easier to correc the prob

[zabbu]

so...

where do i get this feed neck adapter?
thank you
brandon

[amazing_spyderman]

i just bought a used warp feed and the sensitivity pot adjuster doesn't seem to work. can i fix this myself, or how much would it cost to have an agd tech fix it?

[JT2002]

u sure everything is set right? even when turned all way counterclockwise it doesnt stop?

[amazing_spyderman]

even if i turn it counter clockwise 10 times it still takes a whack with a screwdriver to get it feeding.

[JT2002]

now u know if u want mroe sensitivity u turn it clockwise right?

[amazing_spyderman]

i already tried it clockwise. that didn't work either.

[Star_Base_CGI]

What?

[stormtr00per]

To clarify the problem

The balls 2-4 get stuck in the barrel (tried using diff barrels same problems), if I shoot the trigger to fast. The warp spins a little less than half way when i pull the trigger, IF I pull continously it maintains being on. Are the balls the problem as I am using dusk just to try out the warp. As to buying maintanence parts is the AGD website the best place cause their shipping is usually outrageous for a dollar belt and the sort.


thanks again.

[WARPED1]

The computer charges that shipping automatically, if you call and order I bet they'd ship normal for ya!

[Star_Base_CGI]

Re: To clarify the problem

Originally posted by stormtr00per
The balls 2-4 get stuck in the barrel (tried using diff barrels same problems), if I shoot the trigger to fast. The warp spins a little less than half way when i pull the trigger, IF I pull continously it maintains being on. Are the balls the problem as I am using dusk just to try out the warp. As to buying maintanence parts is the AGD website the best place cause their shipping is usually outrageous for a dollar belt and the sort.


thanks again.

Well luckily alot of people asked if you could specify the problem. Which was good cause Balls can get stuck anywhere or in lots of places..

I thought maybe you were having trouble picking up balls but it sounds like you are picking up balls okay.

If you have all the jumpers turned off the warp will spin halfway. WHich is no good. Make sure the jumpers 1 or 2 are positioned as in the my picture. Like the Green Jumpers. If all the jumpers are positioned horizontally like the red ones. The dwell time is turned off and you will feed a gazillion balls.

You might also need some nubins or something. Excuse me I am new to this. To make sure that your not double feeding balls into the breech. You should have good detents on the barrels to stop the double feeds or whatever you need to keep more than one ball feding into the breech.

I am sure others will post here. Which is good because they can offer you better more knowlegable tech help than me!