ALL about the WARP-FEED

[Yuji]

Okay, did some searching and found this diagram. Works great.

[1stdeadeye]

Super Up

Super up to Havoc Online and positive feedback. He fixed my butchered Warp. Not only did he fix it and install the Big cell mod, he even moved the jumpers for me to switch my warp from R/T to X-mag!

Thanks man!

[JT2002]

ok, well finally my warp will be out in the mail on monday. hey i better have it back before my big game oni the 17th l,ol

[xpocad]

Warp Help

Hey i just got my first warp and have it on my e-99 i no it sounds crazy but dont hate. I wanna get it to feed 22 bps but not to sure how to yet and the on off switch Can any one tell me how much it would cost me if i were to do it myself

i know i need that 12 v regulator(i think thats what it is called) ( where can i get one radio shack?) and i am guessing i need to plug 2 of the battery adapters into baterys and the third into the one origionally in the warp? not sure... and plug the little white thinging into sumwhere into the inside of the warp right? i think ... and an i set? and the on off do i need to drill through the shell?

[askman]

it is about 8 bucks worth of parts with reg and switch costing the most. I would also get shrink tubing and do it right. If you have no skill at electronics, I would not try it. also, you may need small capacitor for noise. (I used .1uf on the output, and it worked fine) good luck...

radio shack has all the parts you need...

[xpocad]

WARP 12 V

DONT THINK I AM GONNNA DO ITI FIGURED IT WAS JUS GONNA BE A SNAP THIS OUT AND REPLACE IT WITH THIS SNAP IT PART BUT IT SEEMS A LITTLE MORE COMPLICARTED. SO HAS ANY ONE REPLAVED THEIR STOCK HOSE WITH SUM OTHER KIND? I SAW ONE B4 WHERE HE HAD THIS CLEAR HARD PLASTIC THAT DIDNT MOVE. ANY ONE NO A LINK TO WHERE SUM ONE DID IT LIKE THAT. i CANT FIND WEHRE I SAW IT

[Yuji]

Heres a parts list for ya if you get ambitious...it's not that hard to do.



Hear the difference between 9V and 12V
9 Volt Warp
12 Volt


These are the parts you'll need for this little project, all of them available at Radio Shack

7812 Voltage Regulator catalog # 276-1771a
Toggle Switch SPST catalog # 275-624a
LED Assembly with holder catalog # 276-084a
9v Battery snap connectors catalog # 270-325
Heat-shrink tubing catalog # 278-1627b
You'll also need:

13/64 drill bit and a drill
Soldering iron and solder
Hair dryer

Good luck

[Md-Defiant]

I was just wondering, I have a power feed left mag how would i hook the warped hose to this with out going over the top of the gun....? I can't really explain this that well but i tried. If you know what i am talking about. I shoot right handed and i don't want to put the hose up and over to the power feed hole....

[JT2002]

well i dont see why u dont want to do it, but going over the top is by far going to be the best setup for a hopper left mag. but if u really cant live with it like that, then put your 90* warp elbow onto the warp itself, and bring the hose under the gun, at which point you will attatch it to the bottom of your power feed. try it. im not sure but you might need an extra connector or something

[Md-Defiant]

ok maybe i said it wrong(I probably did) But see my power feed tube thing goes like / not like \ and i don't want to put the warped hose over the gun...is that better. sry.

[JT2002]

ok lets set this straight, answer these questions for me...

1. When there is a hopper on the marker, it sits on the...
A.) Left side of gun
B.) Right Side of gun

and

2. You want your warp to sit on the ...
A.) Left side of gun
B.) right side of gun

[Md-Defiant]

it sits on the right side of the gun.... the power feed looks like / with the hopper on the top. and i want the warped on the left.

[askman]

agd sells long powerfeed plug. that way, you put the hose on the bottom of the feed. make it look super neat... they are only 2 or 3 bucks.

[Koosh]

So you basically want it to look like this:

[JT2002]

finally we got some sense